INTERNAL RECLAIM - SEPARATOR			EXTERNAL CYCLONE RECLAIM SEPARATOR
	(N-200, PowerPeen)			(N-200 Cyclone, PowerStrip, HailStorm)
	AIR FLOW RESTRICTION	STATIC PRESSURE (S.P.) (in inches of water)		AIR FLOW RESTRICTION	STATIC PRESSURE (S.P.) (in inches of water)
	Inlet Air Filter	0.5"		Inlet Air Filter	0.5"
	Reclaim - Separator	1.5"		Cyclone Reclaim Separator	3.0"
	Clean Cartridge Filter	0.5"		Clean Cartridge Filter	0.5"
	Seasoning on Cartridge Filter*	0.5" (3.0")		Seasoning on Cartridge Filter*	0.5" (4.5")
	Loose Dust on Cartridge Filter**	0 - 2.0"		Loose Dust on Cartridge Filter**	0 - 2.0"
	HEPA Filtration	1"		HEPA Filtration	1"
	Silencer (always w/ 2 hp blower)	0.5"		Silencer (always w/ 2 hp blower)	0.5"
TOTAL STATIC PRESSURE FOR CABINET:			TOTAL STATIC PRESSURE FOR CABINET:

Always add to total

---

B. DETERMINE THE BLOWER MOTOR FEASIBILITY USING THE TOTAL STATIC PRESSURE CALCULATION

If the total static pressure calculation with a specific size blower motor falls within the green or yellow bands, then the motor and blower impeller will provide sufficient air volume delivery. If a cabinet's total static pressure falls to the far right side of the yellow band, the client may want to consider upgrading to a larger blower motor and impeller.

*	Seasoning on the cartridge filter refers to the dust that imbeds in the cartridge, but will not detach when the filter is cleaned.
**	Static pressure may vary depending on the extent of filter contamination and when the last time the cartridge filter was cleaned. MBA recommends using 2.0" s.p. in the calculation.
***	1/2 hp motor installed on standard collector. 3/4 hp motor installed standard on expanded collector.

<<< BACK