Mediablaster® Cabinets
By Media Blast®
Call Us Factory Direct (866) 204.7068

Made in the USA

Mediablaster® Cabinets
By Media Blast®

4 & 6 Cartridge Reverse Pulse Dust Collectors

Free standing automatic timed reverse pulse dust collectors are used for extended blasting operations, multiple guns, or multiple machine operation and or multiple daily shifts. They help reduce dust collector maintenance time and increase daily production. They can include an optional Negative Pressure HEPA After Filter commonly used for Cell Operation to increased filter efficiency but most importantly, they remove the sandblasting cabinet operator from the daily cleaning cycle for the blast cabinet that increase daily production.

The automatic-timed-reverse/pulse cleaning cycle, (R/P), by Media Blast® is pulse time adjustable but this collector also includes the manual reverse pulse cleaning controls allowing filter cleaning with the blower on or off at any time.

The unit is shipped with its adjustable legs in the lowered position allowing complete machine assembly and shipment using standard enclosed common carrier trucking.

These dust collectors include: Two Dust Air Inlets, Integrated Vacuum Cleaning Assembly, Magnahelic Cartridge Filter Monitor Gauge, 20 Gallon Capacity Dust Waste Drum and they come standard with 2HP 1100 CFM Blower and Blower Silencer with a larger 3 HP blower assembly available. Understand these dust collectors will have the external static pressure of the blasting cabinet added to the operation of the dust collector. The 2 hp blower would normally be a 3 hp motor and the 3 hp blower would normally be a 5 hp blower assembly.

Reverse Pulse Dust Collectors Models

The Media Blast® R/P Free Standing Dust Collectors are available in two model sizes, 4-Cartridge with 880 square feet of filter surface or 6-Cartridge with 1320 square feet of filter cartridge surface.  Both occupy almost the same machine footprint. Both units include the Integrated Vacuum Clean-Up Assembly, Adjustable Legs for easy shipment with vertical filters and Magnahelic Monitor Gauge.

These dust collectors are built for sandblasting application unlike the horizontal filter units commonly found used in Industry for lighter dust loads. Air Pollution Agencies favor vertical filters for sand blasting cabinets to gain the advantage of gravity during automatic reverse pulse cleaning.

Choose the size right dust collector for the application or let us help you, possibly include HEPA after filter for increased efficiency or machine cell operation. Reverse Pulse Cleaning during machine operation with manual over-ride controls and Integrated Vacuum Cleanup are all included

Why Choose Media Blast & Abrasive, Inc.?

At Media Blast & Abrasive, Inc., we are committed to providing you with reliable and efficient sandblasting solutions. Our equipment is designed with the latest technology to ensure high-quality results in every application. One of the key features of our sandblasters is the Reverse Pulse Dust Collectors, which ensure that dust and debris are efficiently removed from the workspace. This means you can work safely and comfortably without any respiratory issues or disruptions. Our sandblasting products are also durable and versatile, making them perfect for a wide range of industries and applications. At Media Blast & Abrasive, Inc., we prioritize customer satisfaction and always put your needs first. Choose our company for your next sandblasting project and experience the difference for yourself.

Read more
Jump to Machine Specs
  • 4 and 6 filter models offering 880 or 1320 sq.ft. of filter area
  • Adjustable legs for lowered height to permit easy shipment to location
  • Vertical filter cartridge for increased efficiency
  • Two (2) service access doors with locking refrigerator door latches
  • Adjustable timed reverse pulse cleaning cycle controls
  • Manual pulse over-ride controls for static cleaning
  • Pulse amplification nozzles each cartridge
  • Outside manifold and controls for easy service
  • 2 blower combinations for high static blowers used with abrasive blasting machines with and without pneumatic conveyors and separator reclaimer
  • Magnahelic monitor gauge for monitoring filter cartridge dust load
  • Blower silencer for 80 db blower operation
  • Large hopper dust storage capacity
  • 20 gallon contained dust removal drum with slide gage
  • Dust inlet plenum
  • Integrated vacuum cleanup assembly with hose, nozzle, bracket and slide-gate on off control
  • Leg floor lag pads
  • Negative pressure HEPA after filer with magnahelic monitor gauge up to 1560 cfm
  • Blower super silencer for low db operation
  • Manually operated hopper assist vibrator for dust removal
  • Heavy smooth wall flexible abrasive dust duct, sold by the foot

NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Model Name:

R/P 880 & 1320 Dust Collector

Machine Type:

Abrasive Blaster Dust Collector, stand-alone for manual and automated abrasive blasting cabinets

Filter Area & Type:

880 sq. ft. – 1320 sq. ft. – 4 vs 6 cartridge models – MERV tested and certified

Blower CFM:

700 to 1500 cfm

Additional Blower Info:

Direct drive 1100, 1300 or 1500 cfm @ 1″ S.P. class III pressure, 2 hp 1100 cfm standard, all blower motors are TEFC

Duct Attachment Inlet:

Available with 4-, 5-, 6-, 7-, & 8-inch dust inlet for duct attachment

Electrical:

Single power source high voltage

WARNING:
Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.

Application:

automated blasting cabinets – high production blasting cabinets – manual blasting cabinets with high daily duty cycles and production soda cabinets

Key Features:

standalone – automatic timed reverse pulse cleaning – manual over ride controls – hopper dust storage – 32-gallon dust removal drum – silencer – integrated vacuum assembly – magnahelic monitor gauge – adjustable legs for low shipping height – optional HEPA after filter

MODEL
R/P 880 & 1320
BLOWER
CFM
FOOTPRINT OVERAL DIMMENSIONS
WITH DOOR ARCS
DUST COLLECTOR
SPECIFICATION
ESTIMATED
SHIPPING WT.
R/P 880
Request Info
2 HP 1100 cfm @ 1" S.P. standard 48"W x 36"D 48"W x 96"D x 110"H 4 filter cartridge
880sq.ft.
1100 CFM Blower Std.
Single Power Source Electrical
Wood crate
1200 lbs.
R/P 880
Request Info
3HP 1350 cfm @ 1" S.P. standard 48W" x 36D" 48"W x 96"D x 110"H 4 filter cartridge
880sq.ft.
1350 CFM Blower Std.
Single Power Source Electrical
Wood crate
1250 lbs.
R/P 1320
Request Info
2HP 1100 cfm @ 1" S.P. standard 48W" x 36D" 48"W x 96"D x 110"H 6 filter cartridge
1320 sq.ft.
1100 CFM Blower Std.
Single Power Source Electrical
Wood crate
1400 lbs.
R/P 1320
Request Info
3HP 1350 cfm @ 1" S.P. standard 48W" x 36D" 48"W x 96"D x 110"H 6 filter cartridge
1320 sq.ft.
1350 CFM Blower Std.
Single Power Source Electrical
Wood crate
1450 lbs.
MODEL
R/P 880 & 1320
R/P 880
Request Info
BLOWER
CFM

2 HP 1100 cfm @ 1" S.P. standard

FOOTPRINT

48"W x 36"D

OVERAL DIMMENSIONS
WITH DOOR ARCS

48"W x 96"D x 110"H

DUST COLLECTOR
SPECIFICATION

4 filter cartridge
880sq.ft.
1100 CFM Blower Std.
Single Power Source Electrical

ESTIMATED
SHIPPING WT.

Wood crate
1200 lbs.

MODEL
R/P 880 & 1320
R/P 880
Request Info
BLOWER
CFM

3HP 1350 cfm @ 1" S.P. standard

FOOTPRINT

48W" x 36D"

OVERAL DIMMENSIONS
WITH DOOR ARCS

48"W x 96"D x 110"H

DUST COLLECTOR
SPECIFICATION

4 filter cartridge
880sq.ft.
1350 CFM Blower Std.
Single Power Source Electrical

ESTIMATED
SHIPPING WT.

Wood crate
1250 lbs.

MODEL
R/P 880 & 1320
R/P 1320
Request Info
BLOWER
CFM

2HP 1100 cfm @ 1" S.P. standard

FOOTPRINT

48W" x 36D"

OVERAL DIMMENSIONS
WITH DOOR ARCS

48"W x 96"D x 110"H

DUST COLLECTOR
SPECIFICATION

6 filter cartridge
1320 sq.ft.
1100 CFM Blower Std.
Single Power Source Electrical

ESTIMATED
SHIPPING WT.

Wood crate
1400 lbs.

MODEL
R/P 880 & 1320
R/P 1320
Request Info
BLOWER
CFM

3HP 1350 cfm @ 1" S.P. standard

FOOTPRINT

48W" x 36D"

OVERAL DIMMENSIONS
WITH DOOR ARCS

48"W x 96"D x 110"H

DUST COLLECTOR
SPECIFICATION

6 filter cartridge
1320 sq.ft.
1350 CFM Blower Std.
Single Power Source Electrical

ESTIMATED
SHIPPING WT.

Wood crate
1450 lbs.