click on image for larger view
Media Blast® offers the newly designed Pro Stage III Elite for every abrasive mesh size, 80 to 220 mesh. This is the only machine capable of processing half-tones using 220 mesh without abrasive loss.
The unit includes the larger 700 cfm blower with blower silencer, a 110 square foot cartridge filter dust collector, MERV tested, and the machine is complete with pneumatic vibrator cleaning cycle. While the same cabinet is used on all three models, the Stage III includes the heavy Industrial door design with knife sealing door seal and lockable door handle. The quick-fill pot reloading 3-way valve circuit is also included standard. The stage III also has the vertically adjustable foot treadle pedal for adjustable sit-down machine operation.
If you’re looking for blast cabinet parts or the user manual for this sand blasting cabinet, contact us here.
PRO by CrystalBlast®
Value for dollar Sandcarver
Dry, direct pressure
5.7 cfm @ 30 psi
We recommend a 220-volt single-phase electrical power supply for the compressor. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number; always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.
60 to 220 mesh
Silicon carbide has lower dust levels, better visibility
Aluminum Oxide & Silicon Carbide
700 cfm blower – patented bolt-on separator reclaimer – 110 sq. ft. cartridge filter – pneumatic vibrator dust collector cleaning cycle – negative pressure hopper dust storage dust collector – patented separator reclaimer – service access door – quick-fill pot circuit
Large 36″ wide cabinet – right side access door – left side mounted dust collector – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector and window sweep – 700 cfm blower – patented internal separator – 3/32″ tungsten nozzle – certified cartridge filtration – vertically adjustable foot operated blast treadle pedal – all pneumatic flow control w/ high pressure flow control valve – operator dash panel – machine leveling pads and padded armrest
Restrictions and Warning
Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
36”W x 24” D x 24” H
53” W x 24” D x 79” H
Less Padded Armrest
19” x 19” H
0.8 Cu. Ft. ASME
5.7 CFM @ 30 PSI
120 Volt, 60 Cycle
110 Sq.Ft. Cartridge
700 CFM Blower
610 Lbs. Crated