click on image for larger view
The *Patented CrystalBlast® Summit™ Master is a new and different approach to standard sandcarving and similar to the standard CrystalBlast® Summit. What’s the difference between the two sandblasting cabinets? The Summit® Master comes standard with a 440 sq.ft. dual cartridge dust collector already attached, the larger 2 hp 1100 cfm blower with blower silencer for an increased daily machine duty cycle is also included. The Master Design includes the pneumatic abrasive conveyor to remove all the abrasive from inside the cabinet each time it exits the nozzle. This is used to aerate and keep fine abrasive flowing in larger cabinet sizes when using fine abrasives, great for production. The high-efficiency cyclone separator reclaimer is the most effective mechanical separator reclaimer design available today for the separation and reuse of any blasting media size. The abrasive storage hopper located below the cyclone separator holds the abrasive vertically above the pressure pot and quickly loads it back into the pressure pot when the operator decides the pot needs refilling. This allows larger optional pressure pots to be added for extended run times that are all part of extended running times and higher daily production output.
Standard Sandcarving applications are possible using the front-loading, high-velocity work ports that easily convert to optional brushed port with slit-rubber sealing curtain for larger wider parts. Additionally, you can still open and use the side access door for larger parts just like any other Sandcarver blast cabinet.
The Summit Master sand blasting cabinet has the ability to reduce part setup and processing time on long or short part runs by using the new patented design and system which utilizes its special trapezoid shape with separate sealed chamber to allow the operator to simply blast outside the inside cabinet we call the “Box”. Use the new mold system or the universal diaphragm fixture plate and the operator can process the parts outside the blasting chamber saving time by not using any protection taping. This new patented design also keeps the part cleaner because the part is being blasted outside the abrasive containment chamber.
Eliminate labor time and operator fatigue by using the Summit or Summit Master with its patented design and remember, it’s also a standard sandcarving cabinet.
The large standard 440 square with 2 hp blower can support an optional HEPA after filter seen in the photo increasing the efficiency of the dust collector allowing cell operation or operation is smaller spaces.
If you’re looking for blast cabinet parts or the user manual for this Mediablaster®, contact us here.
Summit™ Master by CrystalBlast®
No more protection taping, blast outside the box – comes with a pneumatic conveyor – available in two cabinet sizes
Dry, direct pressure
5.7 cfm @ 30 psi with standard 3/32″ nozzle ID or 8.4 cfm @ 30 psi with 1/8″ nozzle ID
We recommend a 220-volt single-phase compressor electrical power supply for operation using 3/32″ nozzle, ask for details when using 1/8″ nozzle ID. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.
60 to 240 mesh
Silicon carbide has lower dust levels, better visibility
Aluminum Oxide & Silicon Carbide
1100 cfm blower w/ silencer – 440 sq. ft. cartridge filters – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure cabinet and dust collector – maintenance access door – pneumatic abrasive conveyor for outside abrasive storage – lowest abrasive usage cabinet with maximum abrasive recycles
Most advanced traditional Sandcarver – the trapezoid master cabinet allows blasting outside the inside cabinet using the included part vestibule – eliminates protection taping – can save 40% production time – uses easy customer made silicone part molds held with patented mold magnets – all controls included – for 10 to 1000 part runs – optional feature available to include upgraded dust collector, HEPA after filtration and full front velocity slot – the master includes the pneumatic conveyor and outside abrasive storage for more active operation allowing faster vertical pot loading
Restrictions and Warning
Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
36" x 24" x 30"H
Door 15" x 25.5"H
60" x 70" x 86"H
440 sq.ft. cartridge
2 hp 1100 cfm blower
Pneumatic Abrasive Conveyor
100% welded cabinet
Hopper dust storage
Pneumatic vibrator cleaning
240 mesh separator
Single power source
36" x 36" x 30"H
Door 23" x 25.5"H
60" x 80" x 86"H