Call Us Factory Direct (866) 204.7068

Made in the USA

HYDROSLURRY® WET BLASTER

The new HydroSlurry® wet (vapor) blasting cabinet by Media Blast®, also the manufacturer of the Industrial Hurricane™ Wet Blast Machine for 42 years, now offers the lower cost HydroSlurry® wet blasting MediaBlaster® cabinet.

If you’re thinking about equipping your shop with an affordable wet slurry blaster cabinet check out our new stainless steel HydroSlurry® vapor blasting model available in three standard cabinet sizes plus the 2420 bench top model. Choose the cabinet size right for your application. We only offer this model in stainless steel slurry cabinets only and Media Blast® has been making wet blasting machines since 1977.

If you’re looking for a wet (vapor) blast cabinet to produce great looking part finish, processing composites using zero frictional heat, 3-D part processing wet, automotive and motorcycle restoration, wheel re-finishing for new coatings, no abrasive impregnation into the part surface or just a chemically clean surface for critical plating and coatings, look to Media Blast to supply the right media blaster for your specific application the first time.

Our HydroSlurry® stainless steel model is a less expensive wet slurry blaster great for today’s automotive applications, R&D applications, restoration projects and much more. It offers a clean blasting process in a small area and is the solution to replacing a messy, inexpensive blast cabinet you purchased online. Options are available as add-ons making it possible for you to make upgrades in the future to the standard machine configuration.

Read more
Jump to Machine Specs

If you’re looking for blast cabinet parts or the user manual for this machine, contact us here.

STANDARD FEATURES:

  • Stainless Steel Slurry Cabinet
  • Ground Fault (GFI) Power Cord
  • 1/2 hp Slurry Suspension Pump
  • Independent Power and Pump Switch
  • Mist Blower with Decant Filter for a legal negative pressure wet blasting cabinet
  • Dual Foot Pedal Controls, Blast and Window Wash
  • Advanced LED Cabinet Lighting
  • Stainless Perforated Grate Overlay
  • Easy to Service Pump Assembly
  • Stainless Main Drain Valve, Stainless Water Drain Valve Stainless Decant Valve
  • 1% to 15% and higher Abrasive Suspension
  • Positive Abrasive Agitation Lines
  • Positive Slurry Pressure Supplied to the Gun
  • Gun Holding Bracket
  • Safety Door Interlock Switch
  • Window Wash System, two function
  • Spray Gun Assembly for part wash
  • 13” x 24” Positive Sealing Clearview® View Window
  • All Air Controls with easy to use operator’s control panel
  • Tungsten Carbide Nozzle, cfm usage customer choice, 20 cfm @ 80 psi standard, 16 cfm @ 80 psi available
  • Long Wear Abrasive Hose
  • Refrigerator Door Latch, locking

AVAILABLE OPTIONS:

  • Boron carbide nozzle with high velocity blasting nozzle
  • Automatic hopper decant valve with air regulator
  • Maintenance timer connected to blast pedal
  • Pump upgrade to urethane impeller pump with stainless agitation lines
  • Machine lifting casters, customer assembly required
  • Enclosed water loop system for a non-existing water supply line or drain

Model Name:

HydroSlurry®

Machine Type:

Wet Blasting Cabinet ideal for automotive restoration and more

Abrasive Delivery:

Wet slurry up to 15% abrasive suspension

Air Specs:

16 or 22 cfm gun sizes

Compressed Air Usage:

16 cfm at 80 psi using or 20 cfm at 80 psi, two gun sizes

Suggested Air Compressor:

The standard suggested nozzle size for the HydroSlurry Wet Cabinet is 20 cfm @ 80 psi.  Smaller 16 cfm gun size is available by customer request.  Pro Tip: Never buy a compressor using the displacement cfm number; always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size:

150-1500 mesh and finer

Additional Abrasive Info:

Specific Gravity more than one, less than 2.5

Most Used Abrasive Type:

Glass Beads for Part Restoration, cutting as a percentage can be used for faster part cleaning

Mist Collector

Low velocity mist collection blower with removable condensation filter- better cabinet visibility

Key Features

Stainless cabinet – submersible slurry pump with agitation & gun supply – foot operated blast and foot operated window wash – removable wet cleanable condensation filter – special applications to eliminate frictional heat, prevent part discoloration, clean plating surface and more – great for restoration projects, three cabinet sizes available

MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
MIST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL

3630

Request Info
36" x 30" x 24"H
Door 24" x 25"H
38" x 36" x 70"H 200 CFM Exhaust Blower w/ Condensing Mist Filter 120 V, 1 Phase

3636 Standard Top

Request Info
36" x 36" x 30"H
Door 30" x 25"H
38" x 42" x 70"H 200 CFM Exhaust Blower w/ Condensing Mist Filter 120 V, 1 Phase

4836 Expanded Top

Request Info
48" x 36" x 30"H
Door 30" x 25"H
50" x 42" x 70"H 200 CFM Exhaust Blower w/ Condensing Mist Filter 120 V, 1 Phase

MODEL

WORK AREA /
DOOR OPENING

36" x 30" x 24"H
Door 24" x 25"H

OVERALL
DIMENSIONS

38" x 36" x 70"H

MIST COLLECTOR
SPECIFICATIONS

200 CFM Exhaust Blower w/ Condensing Mist Filter

STANDARD
ELECTRICAL

120 V, 1 Phase

MODEL

3636 Standard Top

Request Info

WORK AREA /
DOOR OPENING

36" x 36" x 30"H
Door 30" x 25"H

OVERALL
DIMENSIONS

38" x 42" x 70"H

MIST COLLECTOR
SPECIFICATIONS

200 CFM Exhaust Blower w/ Condensing Mist Filter

STANDARD
ELECTRICAL

120 V, 1 Phase

MODEL

4836 Expanded Top

Request Info

WORK AREA /
DOOR OPENING

48" x 36" x 30"H
Door 30" x 25"H

OVERALL
DIMENSIONS

50" x 42" x 70"H

MIST COLLECTOR
SPECIFICATIONS

200 CFM Exhaust Blower w/ Condensing Mist Filter

STANDARD
ELECTRICAL

120 V, 1 Phase