Call Us Factory Direct (866) 204.7068

Made in the USA

PrecisionBlast Direct Pressure

The PrecisionBlast™ uses direct pressure to deliver abrasive at 1.1 pounds per minute, 66 lbs./hr., using a high efficiency, *patented, separator reclaimer to aerate and dry the fine abrasive using 150-220 mesh abrasive. The PrecisionBlast sandblasting cabinet can operate with larger abrasive – ask us about optional features needed for larger abrasive sizes.

The Precision Blast is specifically designed for situations when a Pencil Blaster is too small and slow and an Industrial Blaster is too large. It recycles abrasive, generates more frictional heat, doesn’t require an air compressor amplifier, and can out produce production of any pencil blaster about 10 to 1. PrecisionBlast machines aerate the abrasive using one air change per second inside the cabinet and the patented separator reclaimer to make sure the abrasive is not removed and flowing.

This Mediablaster® can be used to de-burr and texture medical tools because direct pressure blasting allows through-hole processing making the part an extension of the nozzle. It's possible to operate the machine, load parts, reload the 50 lb. ASME coded pressure pot, and also clean the dust collector from the front of the machine - standing or seated. This makes a great design for limited mobility operators.

Micro machines are more than just small, messy import cabinets available on the internet at cheap prices or low production pencil blasters. They should include the right abrasive flow controls and recycle the abrasive over and over again even when it’s only 50 microns.

Read more
Jump to Machine Specs

If you’re looking for blast cabinet parts or the user manual for this sandblasting cabinet, contact us here.

  • 100% welded cabinet
  • 50-pound pressure pot with access port, (ASME Coded)
  • True ergonomics for seated or standing operation
  • Movable floor pedal, optional guarded pedal available
  • No spill side access door with lockable door latch
  • Adjustable abrasive flow control using compressed air
  • 3/32” boron carbide nozzle
  • *Patented abrasive separator reclaimer 80 to 240 mesh abrasive
  • Dust collector 100% welded cartridge filter with both air pulse and pneumatic vibrator cleaning cycle
  • 700 cfm class III exhaust blower with silencer, 550 operating
  • 110 sq.ft. filter cartridge dust storage area
  • Hopper dust storage
  • All blast controls
  • Foot operated blast valve
  • Long wear high pressure on-off blast valve
  • Air regulator/filter and gauge
  • 3-way pot quick fill valve
  • Advanced LED cabinet lighting
  • Perforated steel work grating
  • Hopper scalper screen
  • Safety glass Clearview® view window with window protector glass
  • Window sweep air inlets
  • Blow-off gun
  • Padded armrest
  • Safety door interlock
  • Wheel kit
  • OSHA guarded foot pedal
  • Adjustable height foot pedal
  • Inline ambient air dryer
  • Magnahelic dust collector monitor gauge
  • Static discharge kit
  • Optional adjustable machine height, Dyna-Lift hydraulic Installed

NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Model Name:

Precision Blast™

Machine Type:

Most advanced micro blasting cabinet that recycles up to 50-micron abrasive using over and over again and operates on 120-volt electrical

Abrasive Delivery:

Dry, direct pressure

Air Specs:

2-12 cfm

Compressed Air Usage:

5 to 12cfm @ 50 psi

Suggested Air Compressor:

We recommend using 3/32″ ID nozzle and a 220-volt single-phase electrical power supply for the air compressor. We can provide details for applications using 1/8″ nozzle ID. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size:

60-220 mesh

Additional Abrasive Info:

designed for 150 mesh and finer – can be abrasive type sensitive

Most Used Abrasive Type:

Glass Beads, Aluminum Oxide & Silicon Carbide

Dust Collector:

700 cfm blower – blower silencer – 110 sq. ft. cartridge filter – negative pressure hopper dust storage – service access door – patented separator reclaimer for operation of abrasives down to 50 micron

Key Features:

Clean operation – 50-pound ASME coded pressure pot – blower silencer – 100% welded cabinet – micro flow controls of 1 lb. / min – patented internal separator reclaimer – 3/32″ tungsten carbide nozzle – high pressure low wear on-off flow valve – blow off gun – padded armrest – industrial micro applications using abrasive recycle

Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.

MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL
ESTIMATED
SHIPPING WT.

3624

Request Info
36" x 24" x 24"H
Door 19" x 19"H
39" x 40" x 78"H 110 sq.ft. cartridge
1/2 hp 700 cfm blower
100% welded cabinet
Hopper dust storage
120V/60Hz/1Ph Wood crate
480 lbs

MODEL

WORK AREA /
DOOR OPENING

36" x 24" x 24"H
Door 19" x 19"H

OVERALL
DIMENSIONS

39" x 40" x 78"H

DUST COLLECTOR
SPECIFICATIONS

110 sq.ft. cartridge
1/2 hp 700 cfm blower
100% welded cabinet
Hopper dust storage

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
480 lbs