Call Us Factory Direct (866) 204.7068

Made in the USA

Pro G/S Surface Blending Direct Pressure

Media Blast® pressure machines are available in many sizes for many different applications. The NEW Pro G/S model is a more compact grit and shot blast cabinet. This sandblasting cabinet that has specific features for blending repaired parts, matching factory finishes, camouflaging repairs and blending 3-D parts among other applications. This New Pro G/S design fits small spaces, perfect for R&D (research and development) and smaller shops when direct pressure is needed occasionally and it includes casters to allow you to roll it out and move it back.

The Pro G/S MediaBlaster® uses all negative pressure cartridge dust collector with pneumatic vibrator cleaning cycle. Because steel shot and grit are mostly low dust, the Pro G/S retains the all-negative pressure dust collector, 110 sq.ft. of MERV tested cartridge filtration and hopper bottom dust storage with service access door, great combination for low dust steel abrasives. The 0.8 cubic foot ASME coded pressure pot is standard and includes the pot service access port for any future pressure pot maintenance.

The unit includes a large ClearView® 13” x 24” view window with tool-less replacement, low static window protector, and cabinet rear wall rubber protector.

If you need a grit blast cabinet or a shot blast cabinet this is the perfect unit that includes a large list of standard features with a compact size and affordable price tag.

Read more
Jump to Machine Specs

If you’re looking for blast cabinet parts or the user manual for this media blaster, contact us here.

 

 

  • 1 to 1-1/2 hours / day
  • Value for Dollar
  • 13” x 24” ClearView® Window
  • Anti-Static Window Protector Glass
  • Rubber Back Liner
  • *Patented Separator Reclaimer
  • Window Sweep
  • 8” Work Ports
  • Padded Armrest
  • Easy to use Operator Control Panel
  • Attached 0.8 Cubic Foot ASME Coded Pressure Pot with access port
  • Tool-less Window Replacement
  • 25 CFM Nozzle
  • LED Lighting, 30 Watts
  • Operator Work Grates
  • Automatic Pot Blow-Down Controls for quick pot loading
  • Fine Tuning Choke Valve flow control
  • HD Shot Mixing Valve
  • Air Regulator-Gauge-Water Trap
  • Foot Operated Blast
  • Right and Left Side Access Doors
  • 500 CFM Blower
  • Dust Collector Service Door
  • MERV tested filter cartridges, 110 sq.ft.
  • Vibrator Cleaning Cycle, dust collector
  • Machine Casters
  • 120 Volt Operation

*US 7,008,304

 

  • Ambient air dryer
  • Safety door interlock
  • Boron carbide nozzle
  • Anti-static grounding kit
  • Cabinet installation kit
  • Maintenance Meter Attached to Blast Pedal

NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Model Name:

Pro G/S Grit Shot

Machine Type:

Direct Pressure for

Abrasive Delivery:

Dry, direct pressure, grit & shot blasting automotive surface blending for repairs

Air Specs:

Up to 25 cfm

Compressed Air Usage:

Up to 25 cfm for high pressure part blending

Suggested Air Compressor:

We recommend a 220-volt single-phase electrical power supply for the air compressor.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size:

60-220 mesh

Additional Abrasive Info:

Built for low dust abrasive

Most Used Abrasive:

Steel Shot, Steel Grit, Cut Wire & Stainless-Steel Shot

Dust Collector:

500 cfm blower – 110 sq. ft. cartridge – negative pressure cabinet and dust collector – hopper dust storage – dust collector service access door – vibrator cleaning cycle – separator reclaimer

Key Features:

0.8 cubic foot ASME coded pressure pot with access port – automatic pot depressurization for fast pot loading – two doors – small footprint – 24” x 13” view window with protector – LED cabinet lighting – all air controls on operator panel – padded armrest – machine caster

Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.

MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL
ESTIMATED
SHIPPING WT.

Pro G/S

Request Info
42" x 24" x 26"H
Door 20" x 21-3/4"H
47" x 37" x 63"H 90 sq.ft. cartridge
1/2 hp 500 cfm blower
100% welded cabinet
Hopper dust storage
Service access door
Negative pressure
120V/60Hz/1Ph Wood crate
470 Lbs.

MODEL

Pro G/S

Request Info

WORK AREA /
DOOR OPENING

42" x 24" x 26"H
Door 20" x 21-3/4"H

OVERALL
DIMENSIONS

47" x 37" x 63"H

DUST COLLECTOR
SPECIFICATIONS

90 sq.ft. cartridge
1/2 hp 500 cfm blower
100% welded cabinet
Hopper dust storage
Service access door
Negative pressure

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
470 Lbs.