Mediablaster® Cabinets
By Media Blast®
Call Us Factory Direct
(866) 204.7068

Made in the USA US Flag

Mediablaster® Cabinets
By Media Blast®

Cobra Stage I Siphon – Media Blast® Sandblaster

The Cobra Stage I Siphon blast cabinet comes in two different models.  Both are 100% welded, and include a negative pressure, 100% welded dust collector design using MERV tested and certified cartridge filtration. The Cobras are the best of the smaller, compact sandblasting cabinets using 16 or 22 cfm of compressed air.

The Cobra Stage I is a 100% welded negative pressure cabinet.  Also included is a 100% welded dust collector using 14-gauge steel. The Stage I includes two (2) side access doors on the blasting cabinet and one access service door on the dust collector.  The dust collector has hopper bottom dust storage with MERV tested cartridge filtration technology.

This MediaBlaster® model, the Cobra Stage I, was designed for general repair shops, in-house maintenance, home shops and automotive repair shops when compressed air is limited to air compressors operating on only 220-volt single phase power supply that is normally limited to 16 cfm at 80 PSI maximum. This Mediablaster is primarily used for glass bead blasting.

The advanced cartridge filter technology makes the Cobra machines best in their field without considering our larger sand blasting cabinet lineup. Cobra units have a taller-wider cabinet size than the Space Saver model. The Cobra Stage I has a smaller gun size, 16 cfm @ 80 PSI, and uses a 350-cfm blower. It also includes a semi-automatic vibrator dust collector cleaning cycle that cleans with the flick of an air switch like our Industrial machines  Each Cobra machine model has all the air controls. Each model also has the gun size matched to the blower, separator reclaimer and dust collector filters size. 

Why choose the Cobra Stage I Siphon?

Here are a few reasons why the Cobra Stage I Siphon is the right machine for your application:

  • your compressed air is limited
  • you need to operate a smaller cfm gun size with a smaller cfm dust collector blower
  • you need a lower cost machine

Why Choose Media Blast & Abrasive, Inc.?

When it comes to finding the best media blast machines, Media Blast & Abrasive, Inc. should be your number one choice. We understand the importance of quality equipment that can get the job done quickly and efficiently because of our years of experience in the field. Our wide range of products and services caters to the unique needs of every client. No matter how big or small the project may be we have the right machine for you. Our media blast machines, such as the Cobra Stage I Siphon, are known for their durability and effectiveness in removing even the toughest of materials. If you have any questions or need assistance in choosing the right machine for your needs, please don't hesitate to contact us. Our team of experts is always ready to assist you with your project.

 

Read more
Jump to Machine Specs

If you’re looking for blast cabinet parts or the user manual for this machine, contact us here.

  • Right and Left Side Access Door
  • Tool-Less Window Replacement
  • Large Hopper Abrasive Drain
  • Flow Control Mixing Valve Sump with Drain
  • Foot Operated Blast
  • *Patented Separator Reclaimer
  • Negative Pressure Dust Collector, 100% Welded
  • 110 sq.ft. MERV Tested Filter Cartridges
  • Vibrator Cleaned Cartridges (Stage II)
  • Large Dust Storage Hopper
  • Dust Collector Service Door
  • 330 cfm Blower (Stage I)
  • 16 cfm Gun (Stage I)
  • Tungsten Blasting Nozzle
  • 13” x 24” ClearView™ Window
  • Low Static Window Protector Glass
  • Window Sweep
  • Advanced LED Lighting
  • 8” Work Ports
  • All Air Controls
  • Leg Leveling Pads
  • Ambient air dryer
  • Safety door interlock
  • Blow-Off gun
  • Boron carbide nozzle for use with cutting abrasive
  • Anti-static grounding kit
  • Cabinet installation kit

*US 7,008,304

Model Name:

Cobra Stage I

Machine Type:

Light Duty cabinet with double doors and cartridge filter dust collector

Abrasive Delivery:

Dry, Siphon

Air Specs:

16 cfm

Compressed Air Usage:

16 cfm at 80 psi Stage I

Suggested Air Compressor:

We recommend a 220-volt, single-phase electrical power supply for the air compressor.
Pro Tip: Never buy a compressor using the displacement cfm number; always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size:

60 to 120 mesh

Additional Abrasive Info:

Mil-Spec #8 glass beads best

Most Used Abrasive Type:

Glass Beads and Glass Bead Blend with Aluminum Oxide

Dust Collector:

330 cfm blower – 110 sq.ft. cartridge filters – negative pressure dust collector – patented separator reclaimer – manual dust collector cleaning cycle

Key Features:

100% welded – foot operated blast valve – tungsten nozzle – abrasive mixing valve – safety glass window – low static window protector – air regulator combo – separator reclaimer – 2 side access doors – outside LED lighting and housing – vibrator cleaned cartridges

Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample; please call 866-204-7068 for pricing.

MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL
ESTIMATED
SHIPPING WT.
COBRA I
Request Info
42" x 24" x 26"H
2 Doors 20" x 21-3/4"H
47" x 37" x 63"H 90 sq.ft. cartridge
1/2 hp 335 cfm blower stage I
100% welded
Hopper dust storage
Service access door
Negative pressure
120V/60Hz/1Ph Wood crate
400 lbs
MODEL
COBRA I
Request Info
WORK AREA /
DOOR OPENING

42" x 24" x 26"H
2 Doors 20" x 21-3/4"H

OVERALL
DIMENSIONS

47" x 37" x 63"H

DUST COLLECTOR
SPECIFICATIONS

90 sq.ft. cartridge
1/2 hp 335 cfm blower stage I
100% welded
Hopper dust storage
Service access door
Negative pressure

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
400 lbs