Mediablaster® Cabinets
By Media Blast®
Call Us Factory Direct (866) 204.7068

Made in the USA

Mediablaster® Cabinets
By Media Blast®

Cobra Stage II Siphon – Media Blast® Sandblaster

The Cobra Stage II Siphon is one of two Cobra blast cabinet models are available.  Both are 100% welded, and include a negative pressure, 100% welded dust collector design using MERV tested and certified cartridge filtration. The Cobras are the best of the smaller, compact sandblasting cabinets.  The faster cleaning Stage II includes a larger gun size than the Stage I machine.

The Cobra’s all-negative pressure cabinet and negative dust collector are 100% welded using 14-gauge steel. This includes two (2) side access doors on the blasting cabinet and on an access service door on the dust collector, which includes hopper bottom dust storage with MERV tested cartridge filtration technology.

This MediaBlaster® unit was designed for general repair shops, in-house maintenance, home shops and automotive repair shops when compressed air is limited to air compressors operating on only 220-volt single phase power supply that is normally limited to 25 cfm maximum. This mediablaster is primarily used for glass bead blasting.

The advanced cartridge filter technology makes the Cobra Stage II machine best in their field without considering our larger Industrial sand blasting cabinet lineups. Cobra units have a taller-wider cabinet size than the Space Saver model. The Cobra Stage II includes the faster cleaning 22 cfm gun size, a larger 500 cfm blower assembly, and semi-automatic vibrator dust collector cleaning cycle that cleans with the flick of an air switch like our Industrial machines. The Stage II Cobra has all the air controls including a cabinet blow-off gun, a gun size matched to the larger 500 cfm blower, separator reclaimer and dust collector filters size.  The Stage II cleans faster using more gun cfm, has a pneumatic filter cleaning cycle for effortless dust collector cleaning with a larger blower to handle the larger gun size.

Why choose the Cobra Stage II Siphon?

Here are just a few of the reasons why you should Cobra Stage II Siphon is the right machine for you:

  • cleans faster
  • uses more gun cfm
  • has pneumatic filter cleaning cycle for effortless dust collector cleaning
  • has a larger blower to handle the larger gun size

Why Choose Media Blast & Abrasive, Inc.?

When it comes to media blast machines, there are plenty of options out there. But why settle for anything less than the best? That's where Media Blast & Abrasive, Inc. comes in. Our selection of machines is truly second to none, and we're especially proud of our Cobra Stage II Siphon model. This machine is built to handle the toughest jobs, ensuring that you get top-notch results every time. But don't just take our word for it – let us prove it to you. We're always happy to answer any questions you may have about our products or services. So why not give us a call and find out for yourself why Media Blast & Abrasive, Inc. is the number one choice for media blasting? 

Read more
Jump to Machine Specs

If you’re looking for blast cabinet parts or the user manual for this machine, contact us here.

  • Right and Left Side Access Door
  • Tool-Less Window Replacement
  • Large Hopper Abrasive Drain
  • Flow Control Mixing Valve Sump with Drain
  • Foot Operated Blast
  • *Patented Separator Reclaimer
  • Negative Pressure Dust Collector, 100% Welded
  • 110 sq.ft. MERV Tested Filter Cartridges
  • Vibrator Cleaned Cartridges (Stage II)
  • Large Dust Storage Hopper
  • Dust Collector Service Door
  • 500 cfm Blower (Stage II)
  • 22 cfm Gun (Stage II)
  • Tungsten Blasting Nozzle
  • 13” x 24” ClearView™ Window
  • Low Static Window Protector Glass
  • Window Sweep
  • Advanced LED Lighting
  • 8” Work Ports
  • All Air Controls
  • Leg Leveling Pads
  • Ambient air dryer
  • Safety door interlock
  • Cabinet blow-off gun
  • Boron carbide nozzle for use with cutting abrasive
  • Anti-static grounding kit
  • Cabinet installation kit

*US 7,008,304

Model Name:

Cobra Stage II

Machine Type:

Most advanced light duty model with negative pressure cartridge dust collector

Abrasive Delivery

Dry, Siphon

Air Specs:

22 cfm

Compressed Air Usage:

22 cfm at 80 psi (Stage II)

Suggested Air Compressor:

We recommend a 220-volt single-phase electrical power supply for the air compressor.
Pro Tip: Never buy a compressor using the displacement cfm number; always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size:

60 to 120 mesh

Additional Abrasive Info:

Mil-Spec #8 glass beads best

Most Used Abrasive Type:

Glass Beads and Glass Bead Blend with Aluminum Oxide

Dust Collector

500 cfm blower – 110 sq. ft. cartridge filter – negative pressure dust collector – hopper bottom dust storage – patented separator reclaimer – window sweep – pneumatic vibrator dust collector cleaning cycle with air switch control

Key Features:

100% welded cabinet & dust collector – foot operated blast valve – abrasive mixing valve – oversized safety glass window w/ window protector – air regulator combo – patented separator reclaimer – 2 doors – negative pressure 100% welded 110 sq. ft. cartridge dust collector – semi-automatic vibrator cleaning cycle with air switch control

WARNING:
Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample; please call 866-204-7068 for pricing.

MODEL WORK AREA /
DOOR OPENING
OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
STANDARD
ELECTRICAL
ESTIMATED
SHIPPING WT.
COBRA Stage II
Request Info
42" x 24" x 26"H
2 Doors 20" x 21-3/4"H
47" x 37" x 63"H 90 sq.ft. cartridge
1/2 hp 500 cfm blower stage II
100% welded cabinet
Hopper dust storage
Service access door
Negative pressure
120V/60Hz/1Ph Wood crate
400 lbs
MODEL
COBRA Stage II
Request Info
WORK AREA /
DOOR OPENING

42" x 24" x 26"H
2 Doors 20" x 21-3/4"H

OVERALL
DIMENSIONS

47" x 37" x 63"H

DUST COLLECTOR
SPECIFICATIONS

90 sq.ft. cartridge
1/2 hp 500 cfm blower stage II
100% welded cabinet
Hopper dust storage
Service access door
Negative pressure

STANDARD
ELECTRICAL

120V/60Hz/1Ph

ESTIMATED
SHIPPING WT.

Wood crate
400 lbs