click on image for larger view
The CrystalBlast® Master line is not one single model but a sandcarving machine that meets your needs for safe, efficient operation using the abrasive size, pot run time, dust collector requirements and abrasive flow controls right for your daily machine duty cycle for manually processed sandcarving.
All CrystalBlast Master sand blasting cabinets include the pneumatic conveyor to remove the abrasive from the cabinet, aerate, dry and keep fine abrasive flowing each time abrasive exits the nozzle.
This Mediablaster® offers more than 80 additional part handling options to include reduced machine maintenance. Different cabinet sizes are available using a wide range of nozzle ID sizes with the right dust collector for all applications. The standard dust collector on all Master models is 440 sq.ft. of cartridge filtration but optional HEPA after filter is available for cell machine operation. Other options include automatic dust collector cleaning cycles and larger stand-alone automatic dust collectors.
Larger pressure pots permit larger nozzle use and higher machine duty cycle operation. Additionally, the Master blast cabinet models can be purchased without the standard dust collector for operation using one of our much larger standalone automatic cleaning cartridge dust collectors. All Master models include the pneumatic conveyor available with larger optional pressure pot capacity. The standard pressure pot size for all Master Models is 1.0 cubic foot.
CrystalBlast® mediablaster offers the largest line of sandcarving equipment in the market today. From the entry level Pioneer to the Tapeless labor-saving Summit that offers part processing outside the box using no protection taping. Nineteen (19) standard sandcarving models and three (3) standard film washout models make up the CrystalBlast® line.
If you’re looking for blast cabinet parts or the user manual for this sand blasting cabinet, contact us here.
NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.
CrystalBlast® Master Model
Built to handle production sandcarving applications with pneumatic abrasive conveyor and external pressure pot assembly, 1.0 cubic foot
Dry, direct pressure
Up to 35 cfm compressed air usage
The standard nozzle size for the CrystalBlast Master is 3/16″ I.D. using 31 cfm at 60 psi but smaller nozzles sizes are available for applications with smaller air compressors. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.
150 to 240 mesh
150 mesh and finer requires the pneumatic conveyor assembly, 220 mesh can require HEPA After Filter
Aluminum Oxide and Silicon Carbide
1100 cfm blower w/ silencer – 440 sq.ft. cartridge dust collector – automatic timed cleaning cycle – optional HEPA after filtration
100% welded – with external abrasive conveyor – external cyclone separator-external 1.0 cubic foot pressure pot – industrial production –not a typical Sandcarving cabinet, a production Sandcarver!
Restrictions and Warning
Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
36" x 36" x 36"H
Door 27" x 28"H
44" x 68" x 90"H
440 sq.ft. filer area
1100 cfm blower C-III
Timed Vibrator Cleaning
Single power source
48" x 36" x 36"H
Door 27" x 28"H
56" x 68" x 90"H
48" x 48" x 36"H
Door 39" x 28"H
52" x 80" x 90"H