Call Us Factory Direct (866) 204.7068

Made in the USA

CrystalBlast® Pro Stage I (pressure)

Media Blast® offers the newly designed CB Pro Stage I, a cost effective, professional level, Entry Level Sandcarver for almost all applications. The Pro Stage I utilizes a powerful vacuum blower and 110 sq. ft. MERV tested cartridge filter dust collector with pneumatic vibrator cleaning cycle. All Pro Models use the same cabinet size and the same dust collector cabinet with a semi-automatic cleaning cycle, so it will be hard to outgrow this Sandcarving cabinet. The CB Pro Stage I cabinet height and large window with appropriate slope, are designed to create an easily operated stand-up no nonsense sandcarving machine. The single side door design allows the dust collector to be side mounted making a smaller footprint depth easily passing through almost any doorway.

The CB Pro Stage I is value for dollar spent and a popular unit in the CrystalBlast product line.

Read more
Jump to Machine Specs

If you’re looking for blast cabinet parts or the user manual for this sand blasting cabinet, contact us here.

 

  • 100% weldedcabinet and dust collector
  • Dust collector service access door
  • 110 sq.ft. cartridge filtration
  • Pneumatic vibrator cleaning cycle
  • Oversized safety glass window (13.5″ x 24″) with low static protector glass
  • Window sweep air inlet filter reduces window dust
  • 0.8 c.f. pressure pot with access port (ASME Coded)
  • Hopper scalper screen between pressure pot and hopper flange
  • Ergonomically designed flexible whip hose
  • Attached operator work gloves
  • Perforated metal work grates
  • Foot operated blast valve
  • Right side access door
  • Adjustable abrasive flow control using compressed air to eliminate wear
  • 3/32″ tungsten carbide nozzle with tool-less replacement
  • Gravity plate separator for abrasive recycle
  • 110 sq.ft. cartridge filter dust collector with service access door and
    • Dust storage hopper
    • Pneumatic vibrator cleaning cycle
    • 110 sq.ft. MERV tested cartridge filter
  • Low wear industrial on-off blast valve (BlueMax)
  • Air regulator/filter and gauge
  • Advanced LED Cabinet lighting
  • Machine leveling pads
  • Blow-off gun
  • Padded armrest
  • Boron carbide blast nozzle upgrade
  • Inline ambient air dryer
  • Safety door interlock switch
  • Static discharge kit
  • Guarded foot valve upgrade
  • Pneumatic vibrator pot loading assist circuit
  • Adjustable height treadle blast pedal

Look to two, (2), other New Pro Models, the Pro Stage II and the Pro Stage III Elite for even more added features. The Stage I, II and III Elite all use the same cabinet size and the same Dust Collector using the 110 sq. ft. MERV tested cartridge filter with pneumatic vibrator cleaning cycle and dust collector storage hopper. You can use the vibrator cleaning cycle to quickly clean the filter and discharge the dust storage hopper at the same time.

Model Name:

PRO by CrystalBlast®

Machine Type:

Value for dollar Sandcarver

Abrasive Delivery:

Dry, direct pressure

Air Specs:

5-12 cfm

Compressed Air Usage:

5.7 cfm @ 30 psi

Suggested Air Compressor:

We recommend a 220-volt single-phase electrical power supply for the compressor. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number; always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.

Recommended Abrasive Size:

60 to 150 mesh

Additional Abrasive Info:

Silicon carbide has lower dust levels, better visibility

Most Used Abrasive Type:

Aluminum Oxide & Silicon Carbide

Dust Collector:

100 cfmvacuum blower – bolt-on gravity plate separator reclaimer – 110 sq. ft. cartridge filter – negative pressure dust collector w/ dust storage hopper – pneumatic vibrator cleaning cycle – dust collector service access door

Key Features:

Large 36″ wide cabinet – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector and window sweep – 100 cfm vacuum blower – gravity plate flow control valve – 3/32″ tungsten carbide nozzle – leg leveling pads

Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.

MODEL WORK AREA /
DOOR OPENING
OVERALL DUST COLLECTOR STANDARD
ELECTRICAL
SHIP WEIGHT

CB Pro Stage I

Request Info
36” X 24” x 24” H
19” X 19” H
38” X 25” X 67” H 110 sq.ft. Cartridge
110 cfm blower
Hopper Dust Storage
Service Access Door
Vibrator Cleaning CY
120V/60Hz/1 Ph 540 Pounds

MODEL

CB Pro Stage I

Request Info

WORK AREA /
DOOR OPENING

36” X 24” x 24” H
19” X 19” H

OVERALL

38” X 25” X 67” H

DUST COLLECTOR

110 sq.ft. Cartridge
110 cfm blower
Hopper Dust Storage
Service Access Door
Vibrator Cleaning CY

STANDARD
ELECTRICAL

120V/60Hz/1 Ph

SHIP WEIGHT

540 Pounds