click on image for larger view
The *Patented CrystalBlast® Summit™ sandblasting cabinet is a new and different cost saving approach to standard sandcarving with the largest standard dust collector available today (220 sq.ft. cartridge filtration standard). This Mediablaster® offers an available upgrade to 440 sq.ft. cartridge filtration for increased daily duty cycle. It is available in two, (2), cabinet sizes. The standard Summit is 24” in depth and the larger Summit 3636 is 36” in depth remembering blasting outside the cabinet blasting chamber for Tapeless Part Processing is the same size on both models. The Summit sand blasting cabinet can run longer that other models because it uses a much larger dust collector. Simply stated, it can increase daily part production as much as 40% using tapeless part processing blasting outside the blasting chamber with simple magnetically held silicon molds to process parts without any protection taping but it’s also a standard Sandcarving cabinet!
All standard sandcarving applications are possible using the front-loading, high-velocity work ports that easily convert to optional brushed port with slit-rubber sealing curtain for larger wider parts. Additionally, you can still open and use the side access door for larger parts.
The Summit also has the ability to reduce part setup and processing time on long or short part runs by using the new patented cabinet design and patented system which utilizes its special trapezoid shape to allow the operator to "Blast Outside the Box." By using the new patented tool-less easily made mold system, or the universal diaphragm fixture plate, the operator can process the part outside the blasting chamber just after the film mask has been applied to the part - saving time by not supplying any protection taping or protection tapping removal. This new patented design also keeps the part cleaner because the part is being blasted outside the abrasive containment chamber because no abrasive ends up inside the part if it’s a liquid receiver shape.
This design helps to eliminate labor time, as much as a 40%, savings more time with reduction in operator fatigue, labor time and it’s also a standard sandcarving cabinet!
Keep your sandcarving operators happy and productive, place them in front of a new CrystalBlast Summit standard or the larger CrystalBlast Summit 3636 and your worries are greatly reduced.
If you’re looking for blast cabinet parts or the user manual for this sand blasting cabinet, contact us here. *Patent US 9,623,539 *Patent US 7,008,304
US 7,008,304
NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.
Summit™ by CrystalBlast®
No more protection taping, blast outside the box- 2 cabinet sizes available - shown with optional brushed operator port
Dry, direct pressure
5-12 cfm
5.7 cfm @ 30 psi with standard 3/32″ nozzle ID or 8.4 cfm @ 30 psi with 1/8″ nozzle ID
We recommend a 220-volt single-phase compressor electrical power supply for operation using 3/32″ nozzle, ask for details when using 1/8″ nozzle ID. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection. Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because increased tank pressure reduces cfm performance.
60 to 240 mesh
Silicon carbide has lower dust levels, better visibility
Aluminum Oxide & Silicon Carbide
700 cfm blower w/ silencer – 220 sq. ft. cartridge filter (440 optional) – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure cabinet and dust collector – maintenance access door – patented separator reclaimer 60 to 220 mesh
Most advanced traditional Sandcarver – the trapezoid cabinet allows blasting outside the inside cabinet using the included part vestibule – eliminates protection taping – can save 40% of the production time – uses easy customer made silicone part molds over and over again, held with patented mold magnets – all controls included – for 10-to-1000-part runs – optional feature available to include upgraded dust collector, HEPA after filtration and full front velocity slot
Restrictions and Warning
Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
36" x 24" x 30"H Door 15" x 25.5"H
44" x 44" x 86"H
220 sq.ft. cartridge 1/2 hp 700 cfm blower 100% welded cabinet Hopper dust storage Pneumatic vibrator 240 mesh separator Blower silencer
120V/60Hz/1Ph
Wood Crate 756 pounds
36" x 36" x 30"H Door 23" x 25.5"H
44" x 56" x 86"H
Wood Crate 850 pounds