Mediablaster® Cabinets
By Media Blast®
Call Us Factory Direct
(866) 204.7068

Made in the USA US Flag

Mediablaster® Cabinets
By Media Blast®

Tornado Pollution Control Work Bench H/D

Media Blast® offers many different configurations for the collection of Nuisance Dust using down draft work bench airflow.  Designs that can also be a standalone work table less dust collector seen in the Tornado™ Work Table line.

The Tornado PC H/D, (Heavy Duty) is built with a structural frame capable of holding a high part weight.  This is not a sheet metal cabinet but a structural frame with a filter plenum for balanced airflow and static pressure from one end of the work grates to the other end of the work grates.

The Tornado 36120 H/D is a simple, well-designed and cost-effective down draft work bench used for the control of almost any type of nuisance dust resulting from grinding, sanding, deburring and more. This unit is totally self-contained and includes cartridge filter numbers to pass the required airflow needed. The filters are MERV tested and rated for dust collector efficiency and fire-retardant. The Heavy Weight includes one of two separate standing backwards curve blower with vertical silencer to allow air discharge back into the area where the bench is located which prevents loss of heated or cooled air when working in smaller workspaces.

Choose the blower cfm size and the filter surface area needed to control your application dust needs.

The unit is offered as stand up model only, with an open top and directional sides and back, for down-ward airflow direction.  Two blower CFMs are available.

CEC/NEC (North American) Area Classifications

Class II (Explosive Dusts) Hazardous substances

Class II locations are those that are hazardous because of the presence of combustible dust. Note that the dust must be present in sufficient quantities for a fire or explosion hazard to exist. The fact that there is some combustible dust present does not mean a Class II hazardous location exists. To be considered a “dust”, the combustible material must exist as a finely divided solid of 420 microns (0.420 mm) or less. Such a dust will pass through a No. 40 sieve. Just as in Class I, Division 1 and 2, the subdivision of Class II into Divisions 1 and 2 identifies the likelihood that there will be an explosion hazard. Always check local codes to make sure a nuisance dust collector can be used for an application.

Why Choose Media Blast & Abrasive, Inc.?

At Media Blast & Abrasive, Inc., we understand that finding the right equipment to fit your needs can be a daunting task. That's why we're proud to offer the Tornado Pollution Control Work Bench H/D, designed with the durability and versatility you need to take your work to the next level. Not only does this revolutionary design help protect the environment and your employees from harmful dust and debris, it also offers unparalleled ease-of-use to help you stay productive and efficient. When you choose Media Blast & Abrasive, Inc., you're choosing a company that takes your success seriously. Experience the difference today!

Read more
Jump to Machine Specs
  • 4000 or 6000 CFM blower
  • Advanced LED flood lighting
  • Structural steel inner frame for maximum part weight support
  • Catalyst paint, low VOC
  • Toe kickfor stand-up operation
  • Tubular steel bar grating, removable
  • 300 to 500 fpm standard table top surface velocity using perforated overlay
  • 100 to 200 cfm down-draft velocity
  • Easy filter service access
  • Magnahelic filter monitor gauge
  • Vertical blower exhaust silencer
  • Removable dust storage pans
  • Open top loading with directional down-draft sides and back
  • On the Heavy Weight emergency fire bottle just in case
  • Open top hinged side panels
  • Perforated metal debris pans below grates
  • Addition lighting
  • Special color, color chip matched

NOTE: Standard Features are included with every Heavy Weight. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.

Model Name:

Tornado Heavy Duty Work Bench for Nuisance Dust Collection

Machine Type:

Pollution Control down-draft work bench

Filter Area & Type:

880 to 1320 sq.ft.- 4 to 6 filter cartridge

Blower CFM:

4000 cfm or 6000 cfm

Additional Blower Info:

Blower assembly with vertical silencer and adjustable blower motor sheave

Grate Level Velocity

300 to 500 feet per minute with perforated overlay, 100 to 125 fpm down-draft

Electrical:

Single power source, high voltage 230 or 460 volt 3-phase

WARNING:

Consult all OSHA and local rules and regulations for the collection and classification of the type of dust being created and collected.  Never mix metals and never use to collect any type of explosive dust i.e. aluminum, titanium and magnesium.  The dust size and quantity present airborne are used to determine the risk of explosion.

CEC/NEC (North American) Area Classifications

Class II (Explosive Dusts) Hazardous substances

Class II locations are those that are hazardous because of the presence of combustible dust. Note that the dust must be present in sufficient quantities for a fire or explosion hazard to exist. The fact that there is some combustible dust present does not mean a Class II hazardous location exists. To be considered a “dust”, the combustible material must exist as a finely divided solid of 420 microns (0.420 mm) or less. Such a dust will pass through a No. 40 sieve. Just as in Class I, Division 1 and 2, the subdivision of Class II into Divisions 1 and 2 identifies the likelihood that there will be an explosion hazard.

Paint Specification:

Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.

Application:

Match the down-draft needs to the blower and filter collection area

Key Features:

Tornado 36120 is a heavy tubular steel frame built to handle weight – for nuisance dust collection – configuration as seen in the photo with choice of blower cfm and filter cartridge area – optional filter cleaning available for excessive dust loading

MODEL
TORNADO BENCH
NOTES WORK AREA OVERALL
DIMENSIONS
DUST COLLECTOR
SPECIFICATIONS
ESTIMATED
SHIPPING WT.
PC Heavy Duty 36120
Request Info
Stand Up Operation
Open Top
36" D 120" W 180" W x 62” x 72"H does not include silencer 880 sq.ft. Cartridge
4000 CFM Blower
or
1320 sq.ft. Cartridge 6000 CFM Blower
Wood crate
3175 lbs
MODEL
TORNADO BENCH
PC Heavy Duty 36120
Request Info
NOTES

Stand Up Operation
Open Top

WORK AREA

36" D 120" W

OVERALL
DIMENSIONS

180" W x 62” x 72"H does not include silencer

DUST COLLECTOR
SPECIFICATIONS

880 sq.ft. Cartridge
4000 CFM Blower
or
1320 sq.ft. Cartridge 6000 CFM Blower

ESTIMATED
SHIPPING WT.

Wood crate
3175 lbs