Call Us Factory Direct (866) 204.7068

Made in the USA

Automotive Blasters

The Automotive Industry uses a combination of almost all blast cabinet categories. Through the years we found home shops, commercial repair and industrial production all using siphon and direct pressure models. This category shows the smallest to the largest automotive sandblasters used for cleaning, stripping, and shot peening, grouped together for easy evaluation with many different cabinet sizes available. In addition, many have the space saving side mounted dust collector used when floor space is critical. All models include our Patented Abrasive Separator Reclaimer used to remove the dust and spent abrasive to maintain the best possible cabinet visibility. Keep reading to learn about the different automotive sandblasters we offer. 

Not sure where to start? Try our Buying guide!

Not sure which automotive sandblaster you need? We are committed to helping businesses and consumers buy the right machine the first time. If you aren’t sure which sandblaster fits your application, try our machine buying guide or give us a call at 866.204.7068.

Pro G/S Surface Blending Direct Pressure

Media Blast® pressure machines are available in many sizes for many different applications. The NEW Pro G/S model is a more compact grit and shot blast cabinet. This sandblasting cabinet that has specific features for blending repaired parts, matching factory finishes, camouflaging repairs and blending 3-D parts among other applications. This New Pro G/S design fits small spaces, perfect for R&D (research and development) and smaller shops when direct pressure is needed occasionally and it includes…

Features

 

  • 1 to 1-1/2 hours / day
  • Value for Dollar
  • 13” x 24” ClearView® Window
  • Anti-Static Window Protector Glass
  • Rubber Back Liner
  • *Patented Separator Reclaimer
  • Window Sweep
  • 8” Work Ports
  • Padded Armrest
  • Easy to use Operator Control Panel
  • Attached 0.8 Cubic Foot ASME Coded Pressure Pot with access port
  • Tool-less Window Replacement
  • 25 CFM Nozzle
  • LED Lighting, 30 Watts
  • Operator Work Grates
  • Automatic Pot Blow-Down Controls for quick pot loading
  • Fine Tuning Choke Valve flow control
  • HD Shot Mixing Valve
  • Air Regulator-Gauge-Water Trap
  • Foot Operated Blast
  • Right and Left Side Access Doors
  • 500 CFM Blower
  • Dust Collector Service Door
  • MERV tested filter cartridges, 110 sq.ft.
  • Vibrator Cleaning Cycle, dust collector
  • Machine Casters
  • 120 Volt Operation

*US 7,008,304

3030 Savage Direct Pressure

The 3030 Savage sandblasting cabinet comes equipped with a very large 700 cfm exhaust blower and *patented separator reclaimer. It also includes the negative pressure 110 sq.ft. MERV tested cartridge filtration with hopper dust storage and semi-automatic vibrator cleaning cycle found on the Production Charger Model. For smaller areas, the optional blower silencer can be added to reduce the noise level to below OSHA standards. The 3030 Savage Direct Pressure Blast Cabinet is designed to operate…

Features

 

  • 13” x 15” Safety View Window, ClearView®
  • Low Static Window Protector
  • Window Sweep to help keep the window clean
  • Advanced LED Cabinet Lighting
  • Air Inlet Filters
  • 8” Diameter Work Ports
  • Right Side Access Door, Double Panel
  • Lockable Door Handle
  • Operator Control Panel
  • Expanded Metal Work Grates
  • Boron Carbide Nozzle
  • Inside ERGO Flexible Operator Blast Hose
  • HD Adjustable Flow Control Valve
  • Fine Tune Abrasive Flow Choke Valve
  • Constant Pressure Flow Control Pinch Valve
  • Operator Controlled Pot Loading Cycle
  • Blow-Off Gun
  • 110 Sq.Ft. Cartridge Dust Collector Filter
  • Dust Collector Service Access Door
  • Easy Clean Pneumatic Vibrator Cleaning Cycle
  • MERV Test Cartridge Filter
  • Hopper Dust Storage
  • Machine Lag Pads
  • 700 CFM Blower, optional Blower Silencer Available

 

HYDROSLURRY® WET BLASTER

The new HydroSlurry® wet (vapor) blasting cabinet by Media Blast®, also the manufacturer of the Industrial Hurricane™ Wet Blast Machine for 42 years, now offers the lower cost HydroSlurry® wet blasting MediaBlaster® cabinet. If you’re thinking about equipping your shop with an affordable wet slurry blaster cabinet check out our new stainless steel HydroSlurry® vapor blasting model available in three standard cabinet sizes plus the 2420 bench top model. Choose the cabinet size right for your…

Features

STANDARD FEATURES:

  • Stainless Steel Slurry Cabinet
  • Ground Fault (GFI) Power Cord
  • 1/2 hp Slurry Suspension Pump
  • Independent Power and Pump Switch
  • Mist Blower with Decant Filter for a legal negative pressure wet blasting cabinet
  • Dual Foot Pedal Controls, Blast and Window Wash
  • Advanced LED Cabinet Lighting
  • Stainless Perforated Grate Overlay
  • Easy to Service Pump Assembly
  • Stainless Main Drain Valve, Stainless Water Drain Valve Stainless Decant Valve
  • 1% to 15% and higher Abrasive Suspension
  • Positive Abrasive Agitation Lines
  • Positive Slurry Pressure Supplied to the Gun
  • Gun Holding Bracket
  • Safety Door Interlock Switch
  • Window Wash System, two function
  • Spray Gun Assembly for part wash
  • 13” x 24” Positive Sealing Clearview® View Window
  • All Air Controls with easy to use operator’s control panel
  • Tungsten Carbide Nozzle, cfm usage customer choice, 20 cfm @ 80 psi standard, 16 cfm @ 80 psi available
  • Long Wear Abrasive Hose
  • Refrigerator Door Latch, locking

HYDROSLURRY® WET 2420 SS

The HydroSlurry® 2420 SS vapor blaster is a great choice  when you need a space saving, compact, and stainless steel top loading cabinet.  Media Blast has been manufacturing Industrial Wet Blast Machines for almost half a century. We first offered the Hurricane Industrial model in the late 70s, and have added the cost-effective HydroSlurry® model with submersible pump offered in four different cabinet sizes.  All models are manufactured in stainless steel. The Industrial Hurricane operates…

Features

  • Stainless Steel Cabinet
  • Ground Fault (GFI) Power Cord
  • Mist Blower with Decant Filter for legal negative pressure cabinet with great visibility
  • Easy to Service 1/6 HP Pump Assembly with Dual Outlets
  • Positive Abrasive Agitation Lines
  • Positive Slurry Pressure Supplied to the Gun
  • Foot Operated Blast Pedal, Movable
  • Advanced LED Cabinet Lighting mounted outside
  • Separate Light Switch for easy service
  • Independent Power and Pump Switch
  • Stainless Perforated Grate Overlay
  • Brass Main Drain Valve
  • Brass Water Only Drain Valve, 1/2”
  • 1% to 15% Abrasive Suspension
  • Gun Holding Holster
  • Manual Window Wiper Squeegee
  • 13-1/2” x 15-1/2” Positive Seal Safety Glass View Window
  • All Air Controls with Air Filter/Water Trap for air control protection
  • Tungsten Carbide Nozzle, 16 cfm @ 80 psi standard
  • Long Wear Clear Abrasive Hose
  • Adjustable Door Latch with Lock Open Holding Latch