click on image for larger view
The CrystalBlast® Artist Station sandblasting cabinet allows large vertical, inside the cabinet, part processing. The Brushed Operator Velocity Port Station with Slit Rubber Curtains allows the operator to move from side to side while also having the ability to move the part vertically inside the cabinet. This keeps the area being processed at the proper location for part panel processing.
This Mediablaster® has an operator work port designed for ease of access with the highest possible inlet velocity using velocity port design. Inside port brushes are used to support and hold the outside slit-rubber curtain with a clear open wrist area between the brushes in the center of the high-velocity work port. The slit rubber curtain is pulled against the brushes closing off the horizontal port. Non-metallic composition bar grates are used to protect the parts.
The patented abrasive separator reclaimer is 100% effective on 50-micron, (220), abrasive size and the included pneumatic pot loading vibration circuit helps with fine abrasive re-load back into the pressure pot.
Front and side access door combinations can be ordered eliminating the standard single front access door commonly used for part panel loading.
Standard machine configuration for this model is 120-volt single phase electrical using a single 220-square foot cartridge filter with 700 cfm blower and pneumatic vibrator cleaning cycle. An optional high voltage single power source electrical package is available with the upgraded 440 dual cartridge dust collector. This dual cartridge upgrade can include the 2 hp 1100 cfm blower assembly with high voltage Single Power Source Electrical or simply double the dust collector filter area using the standard 700 cfm blower.
Processing large panels can be a messy, unsafe task when you are using a simple protection hood. For this reason, we offer an optional negative pressure HEPA after filter with magnahelic monitor gauge can be added to the upgraded dual filter dust collector with 2 hp blower assembly.
The Artist Station blast cabinet is a great tool for artist producing one-of-a-kind products in a comfortable and safe environment.
If you’re looking for blast cabinet parts or the user manual for this sand blasting cabinet, contact us here.
NOTE: Standard Features are included with every model. Available Options can be added at additional cost and may require custom machine work, which may increase machine delivery time.
Artist Station by CrystalBlast®
Used for both single artistic panels and standard Sandcarving
Dry, direct pressure
5.7 cfm @ 30 psi with standard 3/32″ nozzle ID or 8.4 cfm @ 30 psi with 1/8″ nozzle ID
We recommend a 220-volt single-phase compressor electrical power supply for operation using 3/32″ nozzle, ask for details when using 1/8″ nozzle ID. Air compressors vary greatly, check the cfm output on the compressor being used or visit Air Basics for more information on compressor selection.
Pro Tip: Never buy a compressor using the displacement cfm number, always use the second cfm volume number listed with 90-100 psi inside the tank, because tank pressure reduces performance.
80 to 180 mesh is standard, separator reclaimer to 220 mesh 50 micron
Aluminum Oxide & Silicon Carbide
700 cfm blower w/ silencer – 220 sq. ft. cartridge filter – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure – maintenance access door – 120-volt machine operation
Standard part carving and stationary panel carving using the front brushed port w/ slit rubber curtain allowing more locations for the operator – slopped insert window – casters – 50 lb. ASME coded pressure pot w/ access port –tungsten carbide nozzle – 3-way pot quick loading valve – casters – largest view window in the market today, and more options to include additional door, expanded dust collector and more
Restrictions and Warning
Environmentally friendly, high-grade polyurethane high gloss paint. Standard colors include MBA beige and high gloss light gray. Custom color matching is available using customer supplied color sample, please call 866-204-7068 for pricing.
48" x 28" x 36"H
Door 42" x 30"H
50" x 44" x 90"H
220 sq.ft. cartridge
1/2 hp 700 cfm blower
100% welded cabinet
Hopper dust storage
240 mesh separator