Mediablaster® Cabinets
By Media Blast®
Call Us Factory Direct
(866) 204.7068

Made in the USA US Flag

Mediablaster® Cabinets
By Media Blast®

Micro Abrasive Industrial Sandblast Cabinets by Media Blast & Abrasive

Micro Abrasive Industrial Sandblast Cabinets by Media Blast & Abrasive

Media Blast & Abrasive created the Micro Industrial Line of industrial sandblast cabinets specifically for applications to replace the slow part processing pencil blaster that do not recycle abrasive, have a low slow production output, and requires the same single person labor to operate each pencil blaster you may have to keep up with daily production increases.

If you have more than one pencil blaster you need to look at the PrecisionBlast Direct Pressure Abrasive Micro Industrial Blaster. This machine will reduce labor hours, allow abrasive to recycle, yield higher DDC, and more. It even has the ability to support the primary dust collector with an optional HEPA After Filter. This means even cleaner operation.

ProTip: The PrecisionBlaster can replace 10 pencil blasters while eliminating 9 times the labor costs when the application is relevant. This machine has Micro Flow Controls, Patented Separator Reclaimer, Semi-Automatic Pressure Pot Re-Loading. It has an impressive abrasive delivery of one, (1), pound per minute, not 2 to 4 pounds per hour.

Media Blast & Abrasive Micro Abrasive Industrial Sandblast Cabinets

Most of the Micro Industrial Sandblast Cabinets we sell use Direct Pressure abrasive delivery. But we offer the PrecisionEtch for applications that require siphon delivery.

  1. PrecisionBlast – designed to meet today’s needs for part processing when a Pencil Blaster is too slow, does not include abrasive recycle, has no cabinet enclosure, does not include the dust collector required, and a regular Industrial Blaster is just too high abrasive flow having no micro abrasive flow controls.
  2. Precision Etch – one of the cleanest micro siphon machines available in the market today. It’s ideal for applications requiring small parts, high production volumes, high DDC, Daily Duty Cycle, with a clean operation.

These Micro Industrial Sandblast Cabinets are offered in one standard cabinet size for a compact space saving footprint. Every cabinet comes standard with

  • Our Patented Abrasive Separator for abrasive recycle. The Reclaimer is used to remove the dust and spent abrasive to maintaining the best possible cabinet visibility. This is even when using 50-micron media due to almost one cabinet air change per second. Optional cabinet configurations are available.
  • Both delivery methods are built to operate on 120-Volt Single-Phase Electrical Power
  • Include large cartridge MERV Tested and Certified cartridge filtration
  • Exhaust blower and silencer

Additional options include Magnehelic Monitor Gauge, Maintenance Timer connected to the blasting pedal, and even HEPA After Filter can be added.

To Sum It Up

Media Blast & Abrasive’s line of Micro Industrial Sandblast Cabinets is built to handle the high-demand of production facilities and special needs of ultra-fine abrasive when hand eye blasting is required and slow 100% automated part coverage requiring 150%-part coverage is just too slow. These machines have the ability to recycle abrasive much faster with more efficiency than a pencil blaster that doesn’t recycle abrasive, our micros have a higher frictional heat if required using a lower processing pressure, and ours include all the rest of the machine features standard.

If you’re not sure whether you need a Micro Industrial Sandblast Cabinets, check out our buying guide or give us a call – our goal is to help you buy the right machine the first time with 62 different models and 170 different blasting cabinets and related machines!

Leave a Reply