By Media Blast®
Machine Catalog | Media Blast & Abrasives, Inc.
A Sand Blaster Cabinet for Every Application
Welcome to Media Blast’s Sand Blaster Cabinet Catalog! This single spooled page shows every sand blaster cabinet and piece of support equipment that we manufacture. This includes over 170 standard cabinet models using multiple cabinet sizes. There is an additional 80+ optional features for increased productivity, part handling, and operator safety easily accessed on the website.
Media Blast has been manufacturing equipment for almost half a century! Machines in this Catalog are listed by categories: wet, light duty, R&D general purpose blasters, industrial production capacity machines, automotive, micro industrial, sandcarving, tumble barrels/baskets, free-standing sandblasting dust collectors, and pollution control benches.
This comprehensive sand blaster cabinet list features eight abrasive delivery types including Wet and Dry, Siphon, Gravity Feed, and Direct Pressure Abrasive Delivery. We also created a separate category for our Industrial Micro Models using both Siphon and Direct Pressure delivery because they are unique. We offer specific abrasive blasting cabinets for Soda, Plastic, and Steel Shot & Grit abrasive media. These machines were designed specifically for plastic stripping using all the plastic abrasives, soda blasting using different DDC, micro precision focused blasting, sandcarving using mask films, and heavy steel abrasives including all the features needed to operate correctly with these special abrasives. They include added features required for these special abrasives and they can also use many of the standard abrasives.
As you progress vertically down this single page, Categories will become more advanced or category-abrasive specific. Media Blast sand blaster cabinets also span a large DDC, Daily Duty Cycle, of 5% to 100% using included design features others do not offer. Support Machinery Categories are also listed relating to equipment found in the abrasive blasting industry.
Media Blast always matches the abrasive delivery type, standard gun cfm size, separator reclaimer efficiency, dust collector filter area, and blower cfm size making sure the user has the right blasting cabinet for their application and DDC. To lower operating costs, we offer a large optional feature list of time and maintenance-saving options. This list can be easily accessed from the main model information folder.
If you’re not sure where to start, give us a call or check out our Buying Guide which can help guide you in the right direction.
Wet Media Blast® Cabinets
Media Blast® has always made Wet & Dry Blast Cabinets. We offer both Industrial and Lower DDC wet blasting cabinet models. All of them are stainless cabinets, and we’ll tell you why!
The first blast cabinets manufactured used a wet slurry accelerated using compressed air. This was an easy way to control dust, but when dry cabinets entered the market using high frictional heat, they almost totally replaced wet cabinet blasting. Today, more and more applications require wet slurry or wet vapor blasting due to its elimination of the frictional heat that can damage delicate parts. A few wet blasting applications include critical plating, chemically clean part surface, no abrasive impregnation into the part surface, and aircraft part cleaning with the least surface removal. If you require a wet blasting cabinet make sure you purchase a stainless-steel cabinet.
Not sure what kind of Wet Blasting Cabinet you need? Contact us!
With almost 50 years of experience, our vast expertise can help you find the right wet blasting cabinet for your application, Industrial Hurricane or home or shop HydroSlurry®. Give us a call at 866.204.7068 with any questions or comments regarding our standard line of abrasive blasting cabinets, products, or services.
Hurricane™
Industrial Wet Blaster
Wet slurry up to 23% abrasive suspension
25-90 cfm
150-1500 mesh and finer
Low velocity blower and filter with removable and cleanable wet condensation mist filter
Stainless cabinet – seal less slurry pump with agitation & gun supply – automatic timed window wash – slide out wet cabinet cleanable filter – special application to eliminate frictional heat, prevent part discoloration, product clean plating surface – outside mounted easily serviced pump assembly
HydroSlurry®
Wet Blasting Cabinet ideal for automotive restoration and more
Wet slurry up to 15% abrasive suspension
16 or 22 cfm gun sizes
150-1500 mesh and finer
Low velocity mist collection blower with removable condensation filter- great cabinet visibility
Stainless cabinet – submersible slurry pump with agitation & gun supply – foot operated blast and foot operated window wash with separate 2 speed window wiper & control switch – removable wet cleanable condensation filter – special applications to eliminate frictional heat, prevent part discoloration, clean plating surface and more – great for restoration projects, three cabinet sizes available
HydroSlurry® 2420 SS
Wet Blasting Cabinet ideal for automotive restoration and more
Wet slurry up to 15% abrasive suspension
16 cfm
220-1500 mesh
Low velocity mist collection blower with removable condensation filter for better cabinet visibility and a cleaner work area
Stainless cabinet – submersible slurry pump with agitation & gun supply – foot operated blast – cabinet exhaust blower with cleanable filter – top loading with lock open door hinge – LED cabinet lighting – special application to eliminate frictional heat, prevent part discoloration, clean plating surface – great for auto and motorcycle restoration projects
Light Duty Media Blast® Cabinets
Light Duty sandblasting cabinets have low DDC usage, use smaller 20 cfm gun sizes, and are always siphon abrasive delivery. These machines can be the right or wrong tool for an application – we’ll explain why!
Often used in small shops or off-time passions, Light Duty Sandblasting Cabinets can not operate using air compressors running on 120-volt single-phase power, which is found in commercial shops and homes. All Media Blast Light Duty Blast Cabinets are 100% welded, include an abrasive separator reclaimer used to remove the dust and material being removed from the parts, and always include foot-operated gun control, abrasive flow valve, safety glass windows with protectors, and more. These small sandblasting cabinets are normally Siphon Abrasive Delivery, and they can be cost-effective if you buy the right machine model.
Need more help? Contact our Sandblasting Cabinet Experts!
Not sure which machine is right for you? We are committed to helping businesses and consumers buy the right machine the first time. If you aren’t sure which sandblasting cabinet fits your application, try our machine buying guide or give us a call at 866.204.7068.
Hobby Blast
Light Duty siphon machine for bench top or wall-mounted operation
Dry, Siphon
5-12 cfm
60 to 120 mesh
Customer supplied shop vacuum or optional Media Blast VAC-110 vacuum dust collector with vacuum separator reclaimer -(cabinet sold less shop vacuum dust collector)
100% welded – foot operated blast – abrasive mixing valve – low static window protector – air regulating valve – LED cabinet lighting – wall mounting bracket – (THIS IS NOT A SPOT-WELDED IMPORT MACHINE)
Space Saver HD
Light duty machine with small footprint and top-loading design
Dry, Siphon
9-16 cfm
60 to 120 mesh
330 cfm blower – tubular dust bag – dust storage pail – patented separator reclaimer
100% welded – foot operated blast valve – tungsten carbide nozzle – abrasive mixing valve – safety glass window – low static window protector – air regulator combo – patented separator reclaimer – top loading for a small footprint
Cobra Stage I
Light Duty cabinet with double doors and cartridge filter dust collector
Dry, Siphon
16 cfm
60 to 120 mesh
330 cfm blower – 110 sq.ft. cartridge filters – negative pressure dust collector – patented separator reclaimer – manual dust collector cleaning cycle
100% welded – foot operated blast valve – tungsten nozzle – abrasive mixing valve – safety glass window – low static window protector – air regulator combo – separator reclaimer – 2 side access doors – outside LED lighting and housing – vibrator cleaned cartridges
Cobra Stage II
Most advanced light duty model with negative pressure cartridge dust collector
Dry, Siphon
22 cfm
60 to 120 mesh
500 cfm blower – 110 sq. ft. cartridge filter – negative pressure dust collector – hopper bottom dust storage – patented separator reclaimer – window sweep – pneumatic vibrator dust collector cleaning cycle with air switch control
100% welded cabinet & dust collector – foot operated blast valve – abrasive mixing valve – oversized safety glass window w/ window protector – air regulator combo – patented separator reclaimer – 2 doors – negative pressure 100% welded 110 sq. ft. cartridge dust collector – semi-automatic vibrator cleaning cycle with air switch control
R&D Media Blast® Cabinets
Looking for great tools like large media blasters with all the features that run on a more limited DDC? You want a category called R&D Blast Cabinets.
These media blasters are designed to accommodate applications that require a large, 100% welded cabinet to contain the blast. They use a smaller gun size and dust collector for more intermittent machine use or not 100% large part cleaning. Options can include Fixed Turntable or Mobile Work Cart. Each of these machines include our Patented Abrasive Separator Reclaimer used to remove the dust and spent abrasive maintaining the best possible cabinet visibility. Media Blast uses a mil-spec wood crating technique to ship these blasting cabinets across the country without damage. Typical use would be cleaning areas to be welded on large heavy parts, but daily operation is normally not required. For daily operation, and higher production, always look at Industrial designed cabinets using larger faster gun sizes.
Need help finding the right Media Blaster? Contact us!
Not sure where to start? Our vast expertise has enabled us with almost half a century of knowledge. If you aren’t sure which media blaster fits your application, try our machine buying guide or give us a call at 866.204.7068 with any questions or comments regarding our standard line of abrasive blasting cabinets, products, or services.
Shop Standard 2.0
New design – 100% welded cabinet & dust collector
Dry, siphon
22 cfm @ 80 psi
60 to 120 mesh
500 cfm blower @ 1” S.P., 110 sq. ft. negative pressure cartridge filter dust collector -separator reclaimer – pneumatic vibrator cleaning cycle with air switch
4 std. cabinet sizes – 100% welded – abrasive mixing valve – all air controls – separator reclaimer – tungsten nozzle – safety glass window – low static window protector – LED cabinet lighting – cartridge dust collector with semi-automatic vibrator cleaning cycle
Shop Standard
100% welded cabinet construction, great for R&D applications
Dry, siphon
22 cfm @ 80 psi
60 to 120 mesh
700 cfm pressure blower @ 1” S.P., 12 sq.ft. tubular bag dust collector – patented separator reclaimer – manual dust bag cleaning cycle
4std. cabinet sizes – 100% welded -abrasive mixing valve – all air controls – patented separator reclaimer – tungsten nozzle – safety glass window – low static window protector –LED cabinet lighting – cost saving positive pressure tubular dust bag dust collector
Industrial Media Blast® Cabinets
This category embraces an extensive array of sandblaster cabinets, making it one of the most inclusive collections of machines. It encapsulates all DRY abrasive delivery types, featuring Siphon, Direct Pressure, and Gravity Feed, along with specialized machines designed for Plastic Stripping, Soda Blasting, and Shot Peening. Our Wet models hold their own distinct Category, separately listed for both high-performance Industrial and lower Daily Duty Cycle (DDC) models. Each Dry model can be customized in a variety of cabinet sizes, accompanied by the option of patented internal or external separator reclaimers to optimize cost and efficiency. At Media Blast & Abrasive, we understand the correlation between time and money, which is why our Industrial Sandblasters are designed for quick cleaning, replete with a myriad of options and upgrades geared for daily operation, all tailored to the gun size necessary to meet your production numbers.
Engage with our Industrial Sandblaster Specialists!
Looking for expert guidance in selecting the right industrial sandblaster? Our wealth of knowledge, honed over almost 50 years of crafting top-quality abrasive sandblasters, is here to help. If you’re unsure about which industrial sandblaster suits your specific requirements, consider using our user-friendly machine buying guide or connect with us directly at 866.204.7068.
We’re here to help you navigate the selection of a sandblaster that fits your specific needs, ensuring that your choice doesn’t just fulfill your current needs but also serves as a reliable, long-term investment.
N-200 Siphon
Industrial, production capacity, machine high duty cycle – larger faster cfm gun sizes – high duty cycle
Dry, siphon
25-90 cfm
60 to 150 mesh, cabinet size sensitive, larger cabinet size 60 to 120 mesh
700 & 1100 cfm blowers – 220 to 440 sq.ft. cartridge filters – hopper dust storage – pneumatic vibrator cleaning standard – patented separator reclaimer – high duty cycle
9 standard production cabinets – internal cyclone separator – 120 volt and high voltage electrical single power standard – abrasive mixing valve – LED lighting – all air controls – carbide nozzle – safety glass window with protector – hopper drain – work grates – and more
N-200 Cyclone
Used for almost any abrasive size, best for ultrafine 180 mesh and smaller – includes the pneumatic conveyor and cyclone separator reclaimer – high duty cycle
Dry Siphon
25 to 90 cfm
150 to 320 mesh, can also use larger mesh sizes
700 & 1100 cfm blower– 220 & 440 sq.ft. cartridge filters – pneumatic abrasive conveyor – outside abrasive storage hopper – high efficiency cyclone – HEPA after filter available for 220 mesh and finer
external cyclone separator and pneumatic conveyor for fine abrasive control – 120 volt and high voltage electrical available – abrasive mixing valve – LED lighting – all air controls – carbide nozzle – safety glass window & protector – hopper drain – work grates – outside abrasive storage hopper – 9 cabinet models – available with Optional HEPA after filter for control of fine ultra-fine abrasives
Power Peen
Direct Pressure with internal abrasive storage
Dry, direct pressure
25-90 cfm
0-150 mesh
700 & 1100 cfm – 220 & 440 sq.ft. cartridge filters – hopper bottom dust storage – patented internal separator reclaimer – dust collector service access door
6 six standard production cabinet sizes – internal patented separator reclaimer – 120 volt and high voltage electrical – abrasive mixing valve – LED cabinet lighting – all air controls – tungsten carbide nozzle – safety glass window with protector – window air sweep – safety door interlock – expanded grates – blow-off gun and more – many options available for part handling, turntables and mobile carts
Power Strip
Direct pressure with pneumatic conveyor to keep the pot running – high duty cycle
Dry, direct pressure
25-90 cfm
0-220 mesh – best application for fine and ultra-fine abrasives 180 – 325 mesh
1100 cfm blower – 440 sq.ft. cartridge filters – hopper dust storage – pneumatic vibrator cleaning cycle – pneumatic abrasive conveyor – single power source electrical
9 production cabinets – 1.0 c.f. pot capacity-high – single and dual filter negative pressure dust collector –- high efficiency cyclone separator – pneumatic abrasive conveyor – safety glass window with protector glass – air window sweep – tungsten carbide nozzle and more
Hailstorm
Everything you need for plastic abrasive use, all included standard high duty cycle
Dry, direct pressure
25-90 cfm
Plastic Abrasive all sizes all hardness types
1100 cfm blower – 440 sq.ft. dual cartridge filters – hopper dust storage – pneumatic vibrator cleaning cycle – pneumatic conveyor – single power source electrical
9 production cabinets – 1.0 c.f. pot capacity – magnetic separator – anti static kit – barrel cyclone for plastic – dual filter 440 sq.ft. negative pressure dust collector – blow down controls – large ClearView window – window sweep – pneumatic conveyor with outside abrasive storage hopper – tungsten carbide nozzle
Blizzard™
Stage III
Complete Soda Blaster System that uses soda once and removes it from the system before entering the dust collector, high duty cycle
Dry, direct pressure soda blaster
20-35 cfm
All available soda sizes
1100 cfm blower – dual filter cartridge polyester filters 220 sq.ft. – hopper dust storage – automatic reverse pulse cleaning – manual pulse and manual vibrator cleaning cycle – used soda drop out waste conveyor with storage container
High production soda machine in 4 standard cabinet sizes – includes Media Blast® Soda Delivery System with 1.0 cubic foot pot – polyester dust collection filters – GhostFlow® soda delivery – three (3) dust collector cleaning features, auto pulse, manual pulse and vibrator – high duty cycle
Automotive & Soda Media Blast® Cabinets
The Automotive Industry uses a combination of almost all blast cabinet categories. Through the years we found home shops, commercial repair and industrial production all using siphon and direct pressure models. This category shows the smallest to the largest automotive sandblasters used for cleaning, stripping, and shot peening, grouped together for easy evaluation with many different cabinet sizes available. In addition, many have the space saving side mounted dust collector used when floor space is critical. All models include our Patented Abrasive Separator Reclaimer used to remove the dust and spent abrasive to maintain the best possible cabinet visibility. Keep reading to learn about the different automotive sandblasters we offer.
Not sure where to start? Try our Wet or Dry Blaster Buying guide!
Still unsure about the right automotive sandblaster for your needs? We are committed to helping businesses and consumers buy the right machine the first time. If you aren’t sure which sandblaster fits your application give us a call at 866.204.7068.
Space Saver HD
Light duty machine with small footprint and top-loading design
Dry, Siphon
9-16 cfm
60 to 120 mesh
330 cfm blower – tubular dust bag – dust storage pail – patented separator reclaimer
100% welded – foot operated blast valve – tungsten carbide nozzle – abrasive mixing valve – safety glass window – low static window protector – air regulator combo – patented separator reclaimer – top loading for a small footprint
Cobra Stage I
Light Duty cabinet with double doors and cartridge filter dust collector
Dry, Siphon
16 cfm
60 to 120 mesh
330 cfm blower – 110 sq.ft. cartridge filters – negative pressure dust collector – patented separator reclaimer – manual dust collector cleaning cycle
100% welded – foot operated blast valve – tungsten nozzle – abrasive mixing valve – safety glass window – low static window protector – air regulator combo – separator reclaimer – 2 side access doors – outside LED lighting and housing – vibrator cleaned cartridges
Cobra Stage II
Most advanced light duty model with negative pressure cartridge dust collector
Dry, Siphon
22 cfm
60 to 120 mesh
500 cfm blower – 110 sq. ft. cartridge filter – negative pressure dust collector – hopper bottom dust storage – patented separator reclaimer – window sweep – pneumatic vibrator dust collector cleaning cycle with air switch control
100% welded cabinet & dust collector – foot operated blast valve – abrasive mixing valve – oversized safety glass window w/ window protector – air regulator combo – patented separator reclaimer – 2 doors – negative pressure 100% welded 110 sq. ft. cartridge dust collector – semi-automatic vibrator cleaning cycle with air switch control
Shop Standard
100% welded cabinet construction, great for R&D applications
Dry, siphon
22 cfm @ 80 psi
60 to 120 mesh
700 cfm pressure blower @ 1” S.P., 12 sq.ft. tubular bag dust collector – patented separator reclaimer – manual dust bag cleaning cycle
4std. cabinet sizes – 100% welded -abrasive mixing valve – all air controls – patented separator reclaimer – tungsten nozzle – safety glass window – low static window protector –LED cabinet lighting – cost saving positive pressure tubular dust bag dust collector
Dominator
Industrial, production-capacity Mediablaster® with high duty cycle
Dry, siphon
25-90 cfm
36 to 150 mesh, cabinet size sensitive
700 cfm blower – 220 sq.ft. cartridge filter – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure dust collector – patented internal separator reclaimer
Siphon production – 3 standard cabinet sizes – side mounted dust collector saving floor space – media mixing valve – all air controls with LED lighting – safety glass window with protector – foot operated blast – tungsten nozzle – blow-off gun – patented separator reclaimer – optional dust collector upgrades available
Charger
Industrial equipment for fast industrial work
Dry, direct pressure
25-90 cfm for different nozzle sizes
60 to 150 mesh
700 cfm blower – 220 sq.ft. cartridge filter – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure dust collector design – patented internal separator reclaimer
3 standard cabinet sizes – direct pressure delivery – side mounted dust collector – media mixing valve – all air controls with LED lighting – 1.0 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector – LED cabinet lighting and more
Hailstorm
Everything you need for plastic abrasive use, all included standard high duty cycle
Dry, direct pressure
25-90 cfm
Plastic Abrasive all sizes all hardness types
1100 cfm blower – 440 sq.ft. dual cartridge filters – hopper dust storage – pneumatic vibrator cleaning cycle – pneumatic conveyor – single power source electrical
9 production cabinets – 1.0 c.f. pot capacity – magnetic separator – anti static kit – barrel cyclone for plastic – dual filter 440 sq.ft. negative pressure dust collector – blow down controls – large ClearView window – window sweep – pneumatic conveyor with outside abrasive storage hopper – tungsten carbide nozzle
Cobra Soda Stage I
Soda cleaning machine with double doors with cartridge dust collector
GhostFlow® Dry, Siphon, Soda Abrasive
16 cfm @ 80 psi
Soda, all mesh sizes
330 cfm blower – 110 sq.ft. cartridge filter negative pressure dust collector and patented separator reclaimer – manual dust collector with pneumatic vibrator cleaning cycle
100% welded – foot operated blast valve – tungsten nozzle – abrasive mixing valve – GhostFlow® soda delivery – safety glass window – low static window protector – air regulator combo – patented separator reclaimer – 2 slide access doors – outside LED lighting with housing – external manual filter cleaning cycle – 0.8 cubic foot pressure pot
N-200 Soda Stage II
Direct pressure for 2 to 3 hours daily usage
Dry, direct pressure
12-27 cfm
all blasting soda sizes
700 cfm blower– single polyester cartridge filter, 110 sq.ft. – hopper dust storage – auto reverse pulse cleaning cycle – manual pulse cycle – pneumatic vibrator cleaning cycle – used soda collection – patented separator reclaimer and collection and release slide gate used soda dropout
3 standard cabinet sizes – includes soda delivery system using Ghostflow® technology – all air controls – dual dust collector cleaning methods – 2-3 hours daily operation – 13 x 24 view window with protector and air swept cleaning – ASME coded pot with access port – LED cabinet lighting and much more
Blizzard™
Stage III
Complete Soda Blaster System that uses soda once and removes it from the system before entering the dust collector, high duty cycle
Dry, direct pressure soda blaster
20-35 cfm
All available soda sizes
1100 cfm blower – dual filter cartridge polyester filters 220 sq.ft. – hopper dust storage – automatic reverse pulse cleaning – manual pulse and manual vibrator cleaning cycle – used soda drop out waste conveyor with storage container
High production soda machine in 4 standard cabinet sizes – includes Media Blast® Soda Delivery System with 1.0 cubic foot pot – polyester dust collection filters – GhostFlow® soda delivery – three (3) dust collector cleaning features, auto pulse, manual pulse and vibrator – high duty cycle
Pro G/S Grit Shot
Direct Pressure for
Dry, direct pressure, grit & shot blasting automotive surface blending for repairs
Up to 25 cfm
60-220 mesh
500 cfm blower – 110 sq. ft. cartridge – negative pressure cabinet and dust collector – hopper dust storage – dust collector service access door – vibrator cleaning cycle – separator reclaimer
0.8 cubic foot ASME coded pressure pot with access port – automatic pot depressurization for fast pot loading – two doors – small footprint – 24” x 13” view window with protector – LED cabinet lighting – all air controls on operator panel – padded armrest – machine caster
3030 Savage
Compact pressure models for operation using smaller air compressors operating on single phase power
Dry, direct pressure
12 to 23 cfm
60-150 mesh
700 cfm blower – 110 sq. ft. cartridge – negative pressure cabinet and dust collector – hopper dust storage – dust collector service access door – vibrator dust collector cleaning cycle – patented separator reclaimer
0.8 cubic foot ASME coded pressure pot with access port – constant pressure pot controls – small footprint – 15” x 13” view window with window sweeps and protector – LED cabinet lighting – all air controls
HydroSlurry®
Wet Blasting Cabinet ideal for automotive restoration and more
Wet slurry up to 15% abrasive suspension
16 or 22 cfm gun sizes
150-1500 mesh and finer
Low velocity mist collection blower with removable condensation filter- great cabinet visibility
Stainless cabinet – submersible slurry pump with agitation & gun supply – foot operated blast and foot operated window wash with separate 2 speed window wiper & control switch – removable wet cleanable condensation filter – special applications to eliminate frictional heat, prevent part discoloration, clean plating surface and more – great for restoration projects, three cabinet sizes available
HydroSlurry® 2420 SS
Wet Blasting Cabinet ideal for automotive restoration and more
Wet slurry up to 15% abrasive suspension
16 cfm
220-1500 mesh
Low velocity mist collection blower with removable condensation filter for better cabinet visibility and a cleaner work area
Stainless cabinet – submersible slurry pump with agitation & gun supply – foot operated blast – cabinet exhaust blower with cleanable filter – top loading with lock open door hinge – LED cabinet lighting – special application to eliminate frictional heat, prevent part discoloration, clean plating surface – great for auto and motorcycle restoration projects
Micro Industrial Media Blast® Cabinets
Media Blast created the Micro Industrial Line of siphon and direct pressure models specifically for proper flow control of smaller amounts of abrasive (measured in pounds per minute) using all the right abrasive delivery controls. These sandblasting cabinets come with a large negative pressure dust collector with lots of filter surface area for clean operation in small spaces and are capable of recycling even 50-micron abrasive media. All our Micro machines include our Patented Abrasive Separator Reclaimer used to remove the dust and aerate the ultra-fine abrasives. Ergonomics was added for comfortable daily operation and the large dust collector has a blower silencer that includes cartridge dust filtration and easy pneumatic vibrator cleaning cycle. These sandblasters are much faster than pencil blasters, up to 10 times faster, and recycle the abrasive unlike pencil blasters with total abrasive loss. The standard configuration operates using only 120-volt single phase electrical power.
Precision Etch
Industrial dust collector on small siphon gun for clean operation using 120-volt electrical Dry Micro Siphon for Laboratories, R&R Applications and Production Micro Applications
Dry, micro siphon
9-16 cfm
60 to 220 mesh
700 cfm blower – 110 sq. ft. cartridge dust collector – negative pressure hopper dust storage –vibrator cleaning cycle – patented separator reclaimer
Clean operation – negative pressure hopper bottom dust collector – easy pneumatic vibrator cleaning – 100% welded cabinet and dust collector – micro abrasive flow controls – padded armrest – use 80 to 220 mesh with the patented internal separator for aeration of the abrasive – all controls – tungsten cabinet nozzle standard – blow off gun included
Precision Blast™
Most advanced micro blasting cabinet that recycles up to 50-micron abrasive using over and over again and operates on 120-volt electrical
Dry, direct pressure
2-12 cfm
60-220 mesh
700 cfm blower – blower silencer – 110 sq. ft. cartridge filter – negative pressure hopper dust storage – service access door – patented separator reclaimer for operation of abrasives down to 50 micron
Clean operation – 50-pound ASME coded pressure pot – blower silencer – 100% welded cabinet – micro flow controls of 1 lb. / min – patented internal separator reclaimer – 3/32″ tungsten carbide nozzle – high pressure low wear on-off flow valve – blow off gun – padded armrest – industrial micro applications using abrasive recycle
Sandcarving Media Blast® Cabinets
In 2003 Media Blast introduced the Patented Line of CrystalBlast® Sandcarving and Film Washout Machinery which raised the bar in the Sandcarving Industry. We were the first manufacturer to introduce Sandcarving equipment with our Patented Abrasive Separator Reclaimer, first with the Industrial Pinch Valve Flow Control, Cartridge Dust Collector, Reverse Pulse Cleaning Cycle, Full Padded Armrest, Window Sweeps, Cleanout Pot Ports and more.
Offering Entry Level, Value for Dollar, and Advanced Ergonomics models, our sandblasters are available with special units for Artistic Panels, Blasting Outside the Box with no protection taping, and cabinets of almost any size, and any DDC, daily duty cycle, required for home shop to advanced high production or high flow facilities.
Our Patented AquaBlast® film washout line can pay for the machine with its GREEN low heated water usage.
CrystalBlast® Scout
Dry Siphon Light Duty for surface etching using developed film masks
Dry, siphon
5-12 cfm
60-150 mesh
Sold less dust collector, must include a shop vacuum or Media Blast VAC-110 vacuum dust collector for operation
100% welded – bench top cabinet – foot control – mixing valve – safety glass window with low static protector – all air controls – lighting – vacuum separator reclaimer included – shown with optional cart and VAC-110 dust collector
CrystalBlast® Pioneer
Entry level Sandcarver or 2nd machine
Dry, direct pressure
5-8 cfm
60 to 150 mesh
Operates using customer supplied shop vacuum or optional VAC-110 dust collector, includes vacuum separator reclaimer
Complete entry level Sandcarver less dust collector – smaller easily cleaned cabinet – foot operated blast –safety glass window with low static protector glass – 50 lb. ASME coded pressure pot with service access port
PRO by CrystalBlast®
Value for dollar Sandcarver
Dry, direct pressure
5-12 cfm
60 to 180 mesh
500 cfm blower – patented bolt-on separator reclaimer – 45 sq. ft. cartridge filter – negative pressure hopper dust storage dust collector – manual cleaning rapper – dust collector service access door
Large 36″ wide cabinet – double doors – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector and window sweep – 500 cfm blower – patented internal separator – 3/32″ tungsten nozzle – MERV certified cartridge filtration – foot operated blast – all pneumatic flow control w/ high pressure flow control valve – machine casters & padded armrest
PRO by CrystalBlast®
Value for dollar Sandcarver
Dry, direct pressure
5-12 cfm
60 to 150 mesh
100 cfmvacuum blower – bolt-on gravity plate separator reclaimer – 110 sq. ft. cartridge filter – negative pressure dust collector w/ dust storage hopper – pneumatic vibrator cleaning cycle – dust collector service access door
Large 36″ wide cabinet – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector and window sweep – 100 cfm vacuum blower – gravity plate flow control valve – 3/32″ tungsten carbide nozzle – leg leveling pads
PRO by CrystalBlast®
Value for dollar Sandcarver
Dry, direct pressure
5-12 cfm
60 to 180 mesh
500 cfm blower – patented bolt-on separator reclaimer – 110 sq. ft. cartridge filter – pneumatic vibrator dust collector cleaning cycle – 180 mesh patented separator reclaimer – dust collector service access door
Large 36″ wide cabinet – right side access door – left side mounted dust collector – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector and window sweep – 500 cfm blower – patented internal separator 180 mesh – 3/32″ tungsten nozzle – certified cartridge filtration 110 sq. ft. – foot operated blast – all pneumatic flow control w/ high pressure flow control valve – machine casters & padded armrest
PRO by CrystalBlast®
Value for dollar Sandcarver
Dry, direct pressure
5-12 cfm
60 to 220 mesh
700 cfm blower – patented bolt-on separator reclaimer – 110 sq. ft. cartridge filter – pneumatic vibrator dust collector cleaning cycle – negative pressure hopper dust storage dust collector – patented separator reclaimer – service access door – quick-fill pot circuit
Large 36″ wide cabinet – right side access door – left side mounted dust collector – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector and window sweep – 700 cfm blower – patented internal separator – 3/32″ tungsten nozzle – certified cartridge filtration – vertically adjustable foot operated blast treadle pedal – all pneumatic flow control w/ high pressure flow control valve – operator dash panel – machine leveling pads and padded armrest
PRO X2 by CrystalBlast®
Sandcarver that is the most machine for dollar spent
Dry, direct pressure
5-12 cfm
60 to 180 mesh
500 cfm blower – patented bolt-on separator reclaimer – 110 sq.ft. cartridge filter – negative pressure hopper dust storage dust collector – vibrator cleaning cycle – patented separator – service access door
large 36″ wide cabinet – double doors – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ access port – safety glass window with low static window protector and window sweep – padded armrest – patented internal separator – 3/32″ tungsten nozzle – certified cartridge filtration – foot operated blast – all pneumatic flow control w/ high pressure pinch valve – machine casters – semi-automatic vibrator cleaning cycle
PRO X2 CE by CrystalBlast®
Often called the International, easy to operate in any language sandcarver, available in 220-volt 50 cycle
Dry, direct pressure
5-12 cfm
60 to 180 mesh
700 cfm blower – patented bolt-on separator reclaimer – 110 sq. ft. cartridge filter – negative pressure hopper dust collector storage dust collector – vibrator cleaning cycle patented separator – service access door for maintenance
Large 36″ wide cabinet – double doors – 50 lb. 0.8 cubic foot ASME coded pressure pot w/ ASME coded access port – safety glass window with low static window protector and window sweep-padded armrest – patented internal separator – safety door interlock switches – 3/32″ long wear nozzle – MERV tested and certified cartridge filtration – foot operated blast – all pneumatic flow control w/ high pressure pinch valve – machine casters – semi-automatic vibrator cleaning cycle – easy to run and operate in any language!
Elite 2.0 by CrystalBlast®
The most advanced Sandcarver built!
Dry, direct pressure
5-12 cfm
60 to 240 mesh
700 cfm blower w/ silencer – patented 60 to 220 mesh bolt-on separator reclaimer – 110 sq. ft. cartridge filter with service access door – hopper dust storage – effortless air pulse and vibrator cleaning cycle – negative pressure – one air change per second
Total ergo sit-down operation – eye level controls – side mounted dust collector fits through std. door – 60-240 abrasive mesh operation – safety glass window – low static window protector and window sweep – 50 lb. ASME coded pressure pot w/ ASME coded access port – pneumatic abrasive flow control – high pressure pinch valve – 3-way quick pot loading valve – padded armrest – LED inspection light & LED cabinet lighting and much more
Summit™ by CrystalBlast®
No more protection taping, blast outside the box- 2 cabinet sizes available - shown with optional brushed operator port
Dry, direct pressure
5-12 cfm
60 to 240 mesh
700 cfm blower w/ silencer – 220 sq. ft. cartridge filter (440 optional) – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure cabinet and dust collector – maintenance access door – patented separator reclaimer 60 to 220 mesh
Most advanced traditional Sandcarver – the trapezoid cabinet allows blasting outside the inside cabinet using the included part vestibule – eliminates protection taping – can save 40% of the production time – uses easy customer made silicone part molds over and over again, held with patented mold magnets – all controls included – for 10-to-1000-part runs – optional feature available to include upgraded dust collector, HEPA after filtration and full front velocity slot
Summit™ Master by CrystalBlast®
No more protection taping, blast outside the box – comes with a pneumatic conveyor – available in two cabinet sizes
Dry, direct pressure
5-12 cfm
60 to 240 mesh
1100 cfm blower w/ silencer – 440 sq. ft. cartridge filters – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure cabinet and dust collector – maintenance access door – pneumatic abrasive conveyor for outside abrasive storage – lowest abrasive usage cabinet with maximum abrasive recycles
Most advanced traditional Sandcarver – the trapezoid master cabinet allows blasting outside the inside cabinet using the included part vestibule – eliminates protection taping – can save 40% production time – uses easy customer made silicone part molds held with patented mold magnets – all controls included – for 10 to 1000 part runs – optional feature available to include upgraded dust collector, HEPA after filtration and full front velocity slot – the master includes the pneumatic conveyor and outside abrasive storage for more active operation allowing faster vertical pot loading
Artist Station by CrystalBlast®
Used for both single artistic panels and standard Sandcarving
Dry, direct pressure
5-12 cfm
60-220 mesh
700 cfm blower w/ silencer – 220 sq. ft. cartridge filter – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure – maintenance access door – 120-volt machine operation
Standard part carving and stationary panel carving using the front brushed port w/ slit rubber curtain allowing more locations for the operator – slopped insert window – casters – 50 lb. ASME coded pressure pot w/ access port –tungsten carbide nozzle – 3-way pot quick loading valve – casters – largest view window in the market today, and more options to include additional door, expanded dust collector and more
MonUBlast by CrystalBlast®
Direct Pressure Stone Carver for markers
Dry, direct pressure
5-30 cfm
60-150 mesh
1100 cfm blower w/ silencer – 440 sq. ft. cartridge filter – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure – maintenance access door – single power source electrical – magnahelic gauge to monitor dust collector
Stone carving just got easier – mobile work cart inside allows side to side cart movement and the included turntable allows part spin – sloped insert window – 100 lb. ASME coded pressure pot w/ access port – boron carbide nozzle – 3 way pot quick loading valve – large view and all the regular features like air controls and single power source electrical – includes 48” high cabinet height and stone marker dolly and part fixture, safety door interlocks, Magnahelic dust collector monitor gauge and much more
Expanded Cabinets by CrystalBlast®
Sandcarver using larger cabinets for containment of oversized parts
Dry, direct pressure
5-12 cfm
60 to 180 mesh
700 cfm blower w/ silencer – patented bolt-on separator reclaimer – 220 sq. ft. single cartridge filter – hopper dust storage – vibrator cleaning cycle – negative pressure dust collector
Standard part Sandcarving – 3/32″ nozzle – 5 large cabinet sizes – Sandcarve large parts with the door closed – all controls including 3-way quick pot loading – 50 lb. pot w/ access port – micro abrasive flow controls with high pressure pinch valve – pneumatic vibrator pot loading cycle optional, abrasive mesh size sensitive
CrystalBlast® Master Model
Built to handle production sandcarving applications with pneumatic abrasive conveyor and external pressure pot assembly, 1.0 cubic foot
Dry, direct pressure
10-40 cfm
150 to 240 mesh
1100 cfm blower w/ silencer – 440 sq.ft. cartridge dust collector – automatic timed cleaning cycle – optional HEPA after filtration
100% welded – with external abrasive conveyor – external cyclone separator-external 1.0 cubic foot pressure pot – industrial production –not a typical Sandcarving cabinet, a production Sandcarver!
Navigator™ 72 by CrystalBlast®
No abrasive with low height – horizontal & vertical panel movement – brushed top and side slots
Dry, direct pressure
6-12 cfm
60 – 240 mesh
1100 cfm blower w/ silencer – 440 sq. ft. attached cartridge filters dust collector – hopper dust storage – pneumatic vibrator cleaning cycle – negative pressure – pneumatic abrasive conveyor
Hopper less technology for low part height – vertical part adjustment – horizontal part roller conveyor – 72-inch-wide cabinet – part passes through design – pop up grate permits standard sandcarving – all controls – 220-volt machine operation – 50 lb. ASME coded 0.8 cubic foot pot with access port and more
AquaBlast® Pioneer
Film Washout Machine using 80% less water usage than the competitor
up to 75 psi
1.0
250 sq. in. with 300 sq. in. drum, 10” x 25” washout, 12” x 25” drum
GFI, 120-volt single phase
The Pioneer film washout machine uses only 1 gpm with a faster washout than the competition – designed and patented for high pressure film washout on today’s films- stainless washout chamber – double stainless top captures all drips – 120-volt GFI operation for easy installation – all stainless braided water supply lines and more
AquaBlast® PRO
Automatic Film Washout Machine
up to 205 psi
2.9
456 sq. in.
GFI, 120-volt single phase
The Pro film washout machine uses less than 3 gpm with a faster washout than the competition – designed and patented for high pressure film washout on today’s films- stainless washout chamber – double stainless top captures all drips – 120-volt GFI operation for easy installation – all stainless braided water supply lines and more
AquaBlast Elite® 2.0
Patented Elite 2.0 has no equal: fastest washout, largest washout area, uses 80% less heated water
Up to 270 psi
3.9
750 sq. in. washout zone with 900 sq. in. drum
220-volt single phase requires 220 – volt single phase GFI circuit breaker
The AB Elite 2.0 washout machine is simply the fastest film washout you can buy – all stainless cabinet including the lower chamber – save time, save money and save heated water using this new patented low flow enclosed pressurized washout design – double pan work top for positive water control – 220 volt power requirement and all the controls you want
TUMBLE BLASTERS, Tumble Barrels, and Tumble Basket Machines
Tumble barrel blaster cabinets and basket blaster cabinets allow blasting of batch loads automatically using random mixing. Two types of tumble blaster machines exist, barrel and basket, and the fastest processing is attained using a tumble barrel design with three directional part mix. The faster you mix, the shorter the processing time using one gun size of only 50 CFM of compressed air. This prevents part nicking and damage during processing. Larger parts that can’t tumble, parts normally longer than five inches, use the slower more cost-effective tumble basket processing. Media Blast manufactures a large line of tumble barrel and basket units all including variable speed drives and a large support shaft for long service as well as the right barrel speed for different part shapes and sizes. Because all Tumble Barrels are sold as options, they can be added to any Industrial Machine Model and include everything needed for part processing fully assembled.
Need help? Contact our Tumble Blaster Experts!
With so many options to choose from, it’s hard to know what is right for you. We are committed to helping you buy the right machine the first time. If you aren’t sure which tumble blaster fits your application, try our machine buying guide or give us a call at 866.204.7068.
TB-5 by Media Blast®
Basket type tumble machine complete
Dry, siphon
25-50 cfm
0-150 mesh internal separator Available in TB-5 cyclone for 150-240 mesh using pneumatic abrasive conveyor
700 cfm blower – 220 sq.ft. cartridge filter – hopper dust storage – pneumatic vibrator dust collector cleaning cycle – negative pressure – service access door patented internal separator reclaimer
Tumble basket machine for daily use – large and small part processing using a basket not a barrel – variable speed – removable basket for load and unload – pivoting gun holder – mixing valve – air controls and LED lighting – patented internal separator claimer – safety glass inspection window and more
TB-5 Master by Media Blast®
Basket tumble machine complete – high daily usage
Dry, siphon
25-50 cfm
0-150 mesh internal separator
Available in TB-5 cyclone for 150-240 mesh using pneumatic abrasive conveyor
700 cfm blower – 440 sq.ft. cartridge filters – hopper dust storage – pneumatic vibrator cleaning cycle – single power source electrical, high voltage
Complete self-contained tumble basket machine for daily production using a larger basket for heavier basket loading – pivoting gun holder – mixing valve – air controls and lighting – patented internal separator reclaimer – safety glass window and more – use for heavy part loading when a barrel machine can’t be used
TB-1 Option
A barrel option – added to any 48″ wide machine model (can be added to any industrial model, wet or dry)
Wet or Dry, siphon or direct pressure
25 cfm barrel gun, 2nd manual blast gun is larger
0-150 mesh internal separator
TB-1 optional can be added to almost any new Media Blast® model, wet or dry
Variable speed 6 rpm max, adjust for barrel size – 12-16” barrel diameter –1″ diameter barrel jack shaft and bearings – includes 2nd access door and 2nd abrasive mixing valve on all dry models
TB-2 Option
A barrel option- added to any 48″ wide machine model
Wet or dry
50 cfm barrel gun
0-150 mesh internal separator
Available 150-240 mesh using any external separator machine model
TB-2 option can be added to any new Media Blast 48″ wide model to permit offset operator work station
1/2 hp variable speed DC drive 28 rpm max – 20-inch barrel diameter – special offset manual work station, requires 48″ wide cabinet – 1-1/2″ diameter barrel jack shaft and bearings – production barrel used on the TB-3 with TB-1 timer controls
TB-3 Option
Tumble Barrel allowing maximum daily output and high duty cycle
Wet or dry
50 cfm
0-150 mesh internal separator
Available 150-240 mesh using any external separator machine model
TB-3 is listed as an option but really a complete machine with: 700 cfm blower – 440 sq.ft. dual cartridge filters – hopper dust storage – automatic timed pneumatic vibrator dust collector cleaning cycle
Variable speed DC drive 28 rpm max – 12 to 22-inch barrel diameter, standard 22” diameter – operator-controlled jog for load and unload –no manual work station – 1-1/2″ diameter barrel jack shaft and bearings – dedicated production tumble barrel with the fastest part mix – single power source electrical – square cabinet design for maximum barrel size diameter – solid state timer and barrel jog control circuit
TB-4 Option
Operate two different barrel sizes – one short load and one bulk load – Two TB-3 machines will out produce one TB-4 model
Wet or dry
100 cfm
0-150 mesh internal separator
Available 150-240 mesh using any external separator machine model
1100 cfm blower w/ silencer – high-voltage single power source – 440 sq.ft. cartridge filters – hopper dust storage – automatic timed pneumatic dust collector cleaning ask standard
2 each variable speed 1/2 hp DC drives, 28 rpm max – 12 to 22-inch barrel diameter – special dedicated square cabinet design with no manual workstation – 1-1/2″ diameter barrel jack shafts and bearings – dedicated tumble barrels for production operation – install a smaller barrel size for short loads – includes operator jog for loading and unloading – optional automatic cleaning 880 sq.ft. dust collector for high DDC, daily duty cycle
Dust Collector Options Media Blast® Cabinets
Media Blast® offers a large line of standalone and modular dust collectors for many of our machine models that can also be used on any existing machine with a poorly designed dust collector. We also offer a vacuum blower operated line to replace small dust collectors on inexpensive machines that don’t include a separator reclaimer. The Media Blast vacuum dust collectors include 110 square feet of MERV tested and certified cartridge filtration, and we also manufacturer a modular line of free-standing collectors with and without dust storage hoppers. The larger freestanding dust collector models with automatic timed reverse pulse cleaning up to 1320 square feet of filter collection surface area, can also include HEPA After Filters. These collectors are made for sand blasting applications using vertical filters found to be the most efficient by air pollution control agencies when used with blasting cabinets. HEPA after filters are also available for even greater dust collector efficiency and are commonly used for machine cell operation.
VAC-110 and VAC-110 Deluxe
Vacuum dust collector for light duty blasting cabinet – 110 sq.ft. cartridge filter for large dust storage using blasting cabinets
110 square foot cartridge- MERV tested and certified
100 cfm
120-volt
Small, lighter duty abrasive blasting cabinets
Vacuum blower with silencer – 100% welded – massive 110 sq. ft. cartridge dust storage capacity – 3 models available – sold less on-off switch supplied by blasting cabinet or option added – VAC-110 Deluxe includes manual filter rapper and dust removal drawer
VAC-110 400
Modular dust collector – single filter cartridge 220 sq.ft. – optional dual filter cartridge 440 sq.ft. – one cabinet with single or dual filter – 700 cfm blower standard – 3/4 hp blower motor
110 square foot cartridge – MERV tested and certified – dust removal drawer – manual filter cleaning rapper
400 @1” S.P.
120-volt
Light Duty Blasting Cabinets, Entry level Sandcarving Machines
Standalone – pneumatic vibrator cleaning cycle – dust storage drawer standard – blower silencer – optional casters, optional hopper bottom dust storage and more
220-700 and 440-700 Modular Dust Collectors
Single (220) and dual (440) filter modular dust collector
220 or 440 sq.ft. modular dust collector – single vs dual filter cartridge – MERV tested and certified
700 cfm @ 1” S.P.
120-volt single power
Any blasting cabinet
standalone – pneumatic vibrator cleaning cycle – blower silencer – optional casters, optional hopper bottom dust storage and more
R/P 880 & 1320 Dust Collector
Abrasive Blaster Dust Collector, stand-alone for manual and automated abrasive blasting cabinets
880 sq. ft. – 1320 sq. ft. – 4 vs 6 cartridge models – MERV tested and certified
700 to 1500 cfm
Single power source high voltage
automated blasting cabinets – high production blasting cabinets – manual blasting cabinets with high daily duty cycles and production soda cabinets
standalone – automatic timed reverse pulse cleaning – manual over ride controls – hopper dust storage – 32-gallon dust removal drum – silencer – integrated vacuum assembly – magnahelic monitor gauge – adjustable legs for low shipping height – optional HEPA after filter
Media Blast® Pollution Control Benches
The Tornado line of Pollution Control Down-Draft Work Benches and Workstations is a very efficient machine design for the collection of nuisance dust. Designed to protect both the operator and surrounding equipment, using either the open top or enclosed top model. This line of machines is also available in Workstation Model, which connect to any central customer supplied
Tornado Work Bench
Pollution Control down-draft work bench with dust collector
220 to 440 square feet filter cartridge
700 and 1100 cfm @ 1” S.P.
120-volt single phase and high voltage single power source
Nuisance dust collection
Tornado nuisance dust work bench can be purchased in many different worktable sizes – enclosed top or open top – 300 to 500 tabletop velocity using perforated overlay – down-draft velocity varies with the bench size, 100 fpm average – open and enclosed top – stand up and sit-down models – adjustable work grates height- LED lighting – clean out dust drawer or pan – casters and many additional options
Tornado Work Table Station
Pollution Control down-draft work table station less dust collector for Nuisance Dust
Does not include blower and filter
N/A – hopper outlets 4-7”
120-volt operation using LED flood lighting
Hopper and duct outlet for attachment to central dust collector for nuisance dust collection
Tornado work table is used with customer supplied central dust collector – provides the down draft for nuisance dust collection – enclosed and open top models with stand up or sit-down operator design
Tornado Heavy Duty Work Bench for Nuisance Dust Collection
Pollution Control down-draft work bench
880 to 1320 sq.ft.- 4 to 6 filter cartridge
4000 cfm or 6000 cfm
Single power source, high voltage 230 or 460 volt 3-phase
Match the down-draft needs to the blower and filter collection area
Tornado 36120 is a heavy tubular steel frame built to handle weight – for nuisance dust collection – configuration as seen in the photo with choice of blower cfm and filter cartridge area – optional filter cleaning available for excessive dust loading